07-’13 Chevy/GMC Sierra 1500 4WD Bilstein 5100 0-1.75″ Front Lift ShocksSale!
2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevy/GMC Sierra 1500 4WD Bilstein 5100 0-1.75″ Front Lift Shocks
Extended Length(in): 18.48
Collapsed Length(in): 12.95
Part Number: 2×24-186940
Fitment: 07-’13 Chevy/GMC Sierra 1500 4WD Bilstein 5100 0-1.75″ Front Lift Shocks
Includes 2 Shocks
Questions and answers of the customers
Ok it's looking like I'm going to get the 5100 series for the rear and the front of my truck which is a 2013 GMC Sierra 1500 4wd Z71. My question then is right now on the front is the stock shocks and I have 20" aftermarket rims with TOYO R/T Open Country 285/55/20 when I purchased that set I had to get the Rough Country front spacer blocks 2" that are actually just a true 1" rubber spacer. So with these front shocks ( 5100 series ) would I be able to adjust the to compensate for that Rough Country spacer so I didn't have to put it back on with new shocks but still loose no height at all. Or I assume I could just reuse them and not adjust the shocks and it would be just fine. Anything you can tell me would be appreciated. THANKS
Q Ok it's looking like I'm going to get the 5100 series for the rear and the front of my truck whic...... Read more answer nowA These front shocks can be operated with a stock spring and are height adjustable from 0-1.75 ″. To do this, you need to rearrange the rings in shock All other spacers must be removed Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y344A00.pdf
do these come with the protective boots/covers for the shock? I have seen many pictures and some do and don't show them
- Even with my 7.5" strut spacer? How much of a height difference is there between the 5100's and a stock strut
- I have a 2012 sierra slt 4x4 with a 7.5" Rough country lift, will these fit on my sierra still using the strut spacer and keep a level stance?