ICON 1-3″ Lift Kit Stage 5 for 2007-2016 GM Silverado/Sierra 1500 Small Taper

SKU: K73005

Description

ICON 1-3″ Lift Kit Stage 5 for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 GM Silverado/Sierra 1500 Truck

Part: K73005

OVERVIEW:

ICON Vehicle Dynamics 2007-2016 GM Silverado/Sierra 1500 suspension systems are designed to dramatically increase the on and off-road ride quality. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the GM platform’s suspension and addressed any areas where performance could be extracted. The Stage 5 system provides a higher level of performance that will drastically improve overall on and off-road vehicle ride characteristics. ICON’s Vehicle-specific tuned 2.5” remote reservoir coilover shocks and ICON 2.5 Series piggyback rear shocks w/ CDCV in this system provide exceptional cooling properties, with the coilovers utilizing ICON-engineered Eibach coil springs for superior vehicle “feel” throughout the range of travel. Remote reservoirs front and rear ensure optimum performance by increasing the duration of consistent damping, keeping the shocks at a cooler operating temperature during extended offroad use. These 2.5″ remote reservoir coilovers w/ CDCV are also height adjustable from 1-3” allowing the use of larger, more aggressive wheel and tire combinations when desired. The ICON Vehicle Dynamics 2007-2016 GM Silverado/Sierra 1500 Stage 5 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as optimum performance in the dirt.

This system features upper control arms with ICON’s patent pending Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application – exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

KEY FEATURES:

  • Fits 2WD and 4WD models
  • Increased wheel travel and ride quality over stock with no change in towing capacity
  • Vehicle specific tuned front and rear shocks for superior shock damping and control
  • ICON CDCV equipped shocks for fully adjustable tuneability of your shocks
  • Adjustable remote reservior coilovers from 1-3″ of lift height
  • 6061 Aircraft grade aluminum CNC machined components
  • Corrosion resistant CAD plated coilover shock body with 7/8 shaft
  • High strength alloy CNC machined lower bar pin
  • FK rod end bearings for extended longevity and minimal deflection
  • 2.5 Series piggyback reservoir rear shocks with 7/8″ shock shafts
  • 100% Bolt-on system – no drilling, cutting, or welding necessary for install

TECH INFO:

  • This system ONLY fits vehicles equipped with the small spindle taper bore (.6875″). For models equipped with large spindle taper bore (.783″) see part #K73005A

WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8″ – 9″ Wide Wheel With 5″ Backspace

Aftermarket Tires: 33″ x 11.50″ Tall Tires

(Larger Tires May Fit but Fender Trimming and Modifications will be Required)

SYSTEM COMPONENTS:

71555C (QTY.1) | 2007-UP GM 1500 2WD/4WD (1-3″ Lift) 2.5″ Remote Reservoir Coilover Shocks w/ CDCV

78600DJ (QTY.1) | 2007-2016 GM 1500 2WD/4WD Delta Joint Tubular UCA (Small Taper)

77700C (QTY.2) | 2007-UP GM 1500 2WD/4WD (0-1.5″ Lift) 2.5 VS Piggyback Series Rear Shock w/ CDCV

OPTIONS:

191011 | Tubular UCA Billet Cap Set

198000 | Spanner Wrench

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “ICON 1-3″ Lift Kit Stage 5 for 2007-2016 GM Silverado/Sierra 1500 Small Taper”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      how do i know if my truck is small or large taper?
    1. 0 votes
      Q how do i know if my truck is small or large taper? answer now
      A **2007-2018 CHEVY/GM 1500 SUSPENSION TYPES** Cast Steel Suspension: **SMALL TAPER** Year range 2007-2016, - Rough textured finish, Magnet will stick, Dark black color, No visible seams or welding Aluminum Suspension: **LARGE TAPER** Year range 2007-2016 - Rough textured finish, Magnet will not stick, Light grey color, No visible seams or welding Stamped Steel Suspension: **LARGE TAPER** Year range 2016-2018 - Smooth painted finish, Magnet will stick, Dark black color, Visible seams and welding
    2. Is this K73005 still in stock?
    3. 0 votes
      Q Is this K73005 still in stock? answer now
      A backordered for now
    4. Hello Dose a 2018 4x4 4-door 1500 Chevy have the Larger Taper Bore on Spindle?
    5. 0 votes
      Q Hello Dose a 2018 4x4 4-door 1500 Chevy have the Larger Taper Bore on Spindle?
      There are no answers for this question yet. Answer now

    Send me a notification for each new answer.

    -

    $4,479.85

    In stock

    In stock