Zone Offroad 5″ Coil Springs Lift Kit 1994-2002 Dodge Ram 2500/3500

SKU: D46N/D47N
Sale!

Description

Zone Offroad 5″ Coil Springs Lift Kit 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Dodge Ram 2500/3500

Part: D46 /D47

Turn your 1994-1999 Dodge Ram 2500/3500 into the truck you’ve always wanted! This 5″ system features upper and lower extended heavy-duty control arms with greasable polyurethane bushings to properly center the axle and correct caster. The dropped pitman arm combined with the heavy duty track bar bracket corrects the steering geometry and centers the axle.

Whether on road or offroad this system is built to perform with optional custom valved Zone shocks that have been tuned to the full height 5″ coils as well as extended polyurethane bump stops

In the rear, a 5″ rear block and add-a-leaf is used to replace the factory block, no stacking in this system.

Featured Technology & Benefits

  • Heavy duty greasable control arms included
  • Extended length urethane bump stops
  • Track bar relocation to properly center your axle
  • Pitman arm included to maintain steering geometry
  • Completely bolt on system

Important Notes!

  • Aftermarket steering stabilizer required. Factory drag link mount taper will be flipped when dropped pitman arm is installed. Order proper Zone stabilizer listed in accessories if replacement is needed.
  • If truck is equipped with rear brake proportioning valve, proportioning valve relocation bracket kit (D5509) is required.
  • Will not fit models built before February 9, 1994 due to track bar stud size.
  • Factory block is replaced with 5″ block and add-a-leaf combo to obtain a level stance.
  • These models came equipped from the factory with two different factory sway bar link setups. For models that have the factory front sway bar links mounted ABOVE the axle bracket, optional sway bar link kit D5501 is required. For models that have the factory front sway bar links mounted BELOW the axle bracket, no additional sway bar link kit is required.
  • If equipped with rear top mounted overload springs 4 of u-bolt part # UBT4050 may be required.
  • If vehicle is equipped with a factory rear sway bar, optional rear sway bar link kit # D5508 is recommended.
  • Models equipped with a 2 piece rear driveshaft and carrier bearing will require optional carrier bearing drop kit # D5505

This product fits the following applications:

  • 1994 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 1995 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 1996 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 1997 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 1998 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 1999 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 2000 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 2001 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 2002 Dodge/Ram Ram 2500 4WD Gas/Diesel
  • 1994 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 1995 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 1996 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 1997 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 1998 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 1999 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 2000 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 2001 Dodge/Ram Ram 3500 4WD Gas/Diesel
  • 2002 Dodge/Ram Ram 3500 4WD Gas/Diesel

Quick Specs

  • Front Lift Height: 5″
  • Front Lift Method: Coil Springs
  • Rear Lift Height: 3″
  • Rear Lift Method: 5″ Block & Add-a-leaf
  • Install Time Hrs: 5-6
  • Difficulty Level 1-5: 2
  • Wheel Size: 16 x 8
  • Back Spacing: 4″
  • Max Tire Size: 35 x 12.50

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Zone Offroad 5″ Coil Springs Lift Kit 1994-2002 Dodge Ram 2500/3500”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      does this kit come with extended brake lines?
    1. 0 votes
      Q does this kit come with extended brake lines? answer now
      A Here's a link to the installation instructions There is a list of everything that goes into this set. https://res.cloudinary.com/stusa/image/upload/v1594760703/images/c715bce4b2390f9009389738b0faec90f3485d40_D1511_D1512.pdf
    2. Does this fit a 1995 dodge 3500 dually 2wd ?
    3. 0 votes
      Q Does this fit a 1995 dodge 3500 dually 2wd ? answer now
      A Unfortunately no This kit only fits 1994 - 1999 DODGE/RAM 2500 / 3500 - 4WD
    4. Does this fit a dually? I have a 1996 Dodge Ram 3500 4wd dually
    5. 0 votes
      Q Does this fit a dually? I have a 1996 Dodge Ram 3500 4wd dually answer now
      A The kit can be used on a dually but you will need to have different U bolts made for the rear axle and the tire and wheel fitment we have does not work. You will have to sort out tire and wheel on your own. I hope this info helps.
    6. Will this kit fit a 2000 Dodge ram 2500 2wd diesel?
    7. 0 votes
      Q Will this kit fit a 2000 Dodge ram 2500 2wd diesel?
      There are no answers for this question yet. Answer now
    8. Where can I find the steering stabilizer needed for this lift?
    9. 0 votes
      Q Where can I find the steering stabilizer needed for this lift? answer now
      A please send us complete info about your truck as follows: Year Model Sub-model Drive train (4WD/2WD) Engine (volume, fuel:gas/diesel) Cab (regular, crew, extended) Lift height ( front and rear lift amount if applicable ) Lift type (spacers, spring coils or specify if anything else was applied for the lift) and we'll try our best to find the proper stabilizer for your vehicle

    Send me a notification for each new answer.

    -

    Base Price: $709.69

    In stock

    In stock

    • Models equipped with a 2-piece rear driveshaft require the carrier bearing drop kit
    • If truck is equipped with rear brake proportioning valve, proportioning valve relocation bracket kit (D5509) is required. Kit includes relocation bracket and hardware to set rear brake proportioning valve back to factory position when installing a 5" Lift System.