SuperLift 6″ Complete Lift Kit 2009-2010 Dodge Ram 1500 4WD with SL Shocks

SKU: K1018_n1

$1,465.27

Out of stock

Notify me when item is back in stock.

Price Match Request

Description

SuperLift 6″ Complete Lift Kit 2009-2010 Dodge Ram 1500 4WD with SL Shocks

Part: K1018_n1

Features:

  • Replacement knuckles yield best possible alignment specs. Front track width is not increased and factory turning radius is retained.
  • Front lower control arm crossmembers laser cut from 3/16″ material.
  • Belly pan, constructed of 1/4″ material, connects crossmembers and protects differential.
  • Front anti-sway bar link extensions retain factory “service for life” links.
  • New Superide Dual Rate rear coil springs provide ideal ride, handling and load carrying capability.
  • New bracketry relocates factory rear 4-link points, anti-sway bar links, brake lines and track bar.
  • New rear compression travel-stop brackets.
  • Rear shock options include Superlift or Bilstein.
  • Installs easily with only slight trimming and no exhaust or driveshaft modifications.
  • Compatible with Dodge’s Electronic Stability Program.


NOTE:
 Will not fit Short Bed Standard Cab models due to rear driveline vibration.

NOTE: The TRX factory ride height is approximately 1″ taller than the standard Ram. The part # K116 is not recommended for use on the TRX models due to possible alignment issues and CV shaft vibration caused by the additional lift. Consider our 4″ lift system (K114) for about 5″ of lift or the K116B with the height adjustable Bilstein front struts. Set the snap ring in the center groove of the strut to achieve proper ride height.

Tire Information:

Tire Wheel Backspacing Offset
37 x 12.5 18 x 9 4.25 – 5
37 x 12.5 20 x 9 5

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers’ wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation:

  • Installation time: 9-10 hours
  • Difficulty level: 4 of 5

NOTE: Will not fit Short Bed Standard Cab models due to rear driveline vibration.

NOTE: The TRX factory ride height is approximately 1″ taller than the standard Ram. The part # K116 is not recommended for use on the TRX models due to possible alignment issues and CV shaft vibration caused by the additional lift. Consider our 4″ lift system (K114) for about 5″ of lift or the K116B with the height adjustable Bilstein front struts. Set the snap ring in the center groove of the strut to achieve proper ride height.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “SuperLift 6″ Complete Lift Kit 2009-2010 Dodge Ram 1500 4WD with SL Shocks”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.