FOX 3.0 Factory Bypass Res Adj 0-2 Lift Shocks 2010-2014 Ford Raptor

SKU: 883-06-046_883-09-047_880

Description

FOX 3.0 Factory Internal Bypass Reservoir – DSC Adjuster 0-2 Lift Shocks 2010-2014 Ford SVT Raptor 4WD

Includes: 2 Front and 2 Rear Shocks

Front Shocks Info:
At FOX, racing has always been the cornerstone of our product development. Our 3.0 Factory Series Coil-over Internal Bypass, position-sensitive shocks maximize the entire wheel travel, increases oil capacity, and adds 60 Percent more damping area over the stock FOX SVT shocks. They allow for a plush predictable ride over normal off-road driving conditions and also have the ability to ramp up damping force for extreme use. These heavy-duty, steel-bodied shocks are loaded with anodized billet aluminum components and race-bred internal valving. They are designed to bolt right on to your factory mounts. The integrated coil spring can be adjusted for preload and ride height and come pre-set to level your vehicle right out of the box. Large 2.5 Inch remote reservoirs with a large -10 hose increasing the shocks cooling capabilities. Dual Speed Compression (DSC) adjuster gives remarkable versatility and precise tuning. A simple twist of either two adjuster knobs allows twelve separate low-speed and ten high-speed compression levels. The 3.0 Factory Series Coil-over Internal Bypass shocks utilizing all of the same components form our race winning Trophy Truck shocks with Eibachᆴ springs, stainless steel shock shafts, PTFE-lined spherical bearings, proprietary racing oil and high-temp Vitonᆴ seals.

    • Features:

 

  • 3.0 Inch Smooth Bore And Honed Seamless Alloy Body
  • Zinc-Plated For Long Lasting Finish
  • 2.5 Inch Smooth Bore And Honed Seamless Alloy Reservoir. Black-Anodized, CNC-Machined 6061-T6 Billet Aluminum Components
  • Application Specific, Adjustable 3.625 Eibachᆴ Racing Springs. 6061-T6 Hard-Anodized, High Flow Aluminum Piston
  • Application Specific Valving To Maximize Performance. PTFE-Lined, Heat-Treated, Alloy Steel Spherical
  • Redundant Sealing Pack System Main Seal, Wiper Seal, Scraper Seal
  • JM92 Advanced Suspension Fluid For Improved Performance At Variable Temperatures
  • Limited 1 Year Factory Warranty And Limited 90 Day Valving Warranty

Specs:

  • Upper Mount Type: Eyelet
  • Lower Mount Type: Stem
  • Extended Length: 27.530 Inch
  • Compressed Length: 19.940 Inch
  • Part: 883-06-046
  • Front Lift: 0-2
  • Important fitment note: 

Rear Shocks Info:
In the rear FOX went all out on the SVT Raptor fitting its huge FACTORY Series 3.0 Inch Bypass shocks that are also found on Brian Deegans and Bryce Menzies championship winning short course trucks. These External Bypass shocks were developed with three independently owner tunable bypass zones for complete ride control regardless of terrain conditions. Married with 2.5 Inch diameter Piggyback reservoirs, lined spherical bearings, proprietary racing oil and Viton seals for unimagined performance and longevity. Pair these shocks with aftermarket leaf springs and bump stop kits to unleash the SVT Raptors true off-road capabilities. FOX QAB (Quick Adjusting Bypass) valves allow simple hand adjustment of the bypass valves. No longer do you need to fumble with tools in order to adjust the external bypass tubes. Each turn of the adjustment knob gives a precise adjustment to the rate of flow through the valve.

Features:

  • Body – Smooth-Bore, Clear Coated, Zinc Plated, Honed Seamless Alloy Bodies
  • Components – Black Anodized 6061-T6 Billet Aluminum. Mounting – Direct Replacement Of Stock Shock Package, Lined, Heat-Treated, Alloy Steel Spherical Bearings
  • Shaft – 7/8 Inch Hard Chrome Plated Stainless Steel 17-4 H900
  • Race-Developed High-Flow Piston Design
  • Valving – Proprietary Deburred Valve Shims
  • Seals – Redundant Sealing Pack System, Main Seal, Wiper Seal, Scraper Seal
  • Oil – Fox Formulated For Ultimate Performance At Variable Temperatures
  • Limited 1 Year Warranty

Specs:

  • Upper Mount Type: Eyelet
  • Lower Mount Type: Eyelet
  • Extended Length: 29.41 Inch
  • Compressed Length: 17.925 Inch
  • Part: 883-09-047
  • Rear Lift: 0-1
  • Important fitment note: 

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “FOX 3.0 Factory Bypass Res Adj 0-2 Lift Shocks 2010-2014 Ford Raptor”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.

    -

    $6,420.37

    Only 2 left in stock

    Only 2 left in stock

    2-5 Day Transit Time