1″ Lift Top Plate Spacer for Nissan Xterra, Frontier, Pathfinder 2005-2021
1″ inch Lift Top Plate Spacer for Nissan Xterra, Frontier, Pathfinder 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Nisstec Lifts T6 aluminum top plate spacer provides about 1″ of lift to your current front coilover system.
Works great with most aftermarket coilovers, OME front lifts, and TJM lift kits.
You will need to source 1/2″ longer hardware for your coilover/OE top mount OR choose the drop down option below for brand new OE style top mounts with longer studs already pressed in.
*These top plate spacers will cause coil bucket contact when used with stock upper control arms
New stock OEM style top plates with longer studs already pressed in are available for an additional $50
*Note actual spacer is 1/2″ . With the geometry of the I.F.S on the Nissans when you add ½” to the top of the coilover is doubles it at the wheel. So in other words ½” Spacer equals out to being 1” of lift at the wheel
Questions and answers of the customers
How thick are these spacers
Q How thick are these spacers answer nowA about 0.5'' They give 1'' lift due to suspension geometry
Can this be used on a 2018 Frontier SV 4x4?
Q Can this be used on a 2018 Frontier SV 4x4? answer nowA yes it will fit
I have a 2015 Xterra Pro-4X; will these spacers work?
Q I have a 2015 Xterra Pro-4X; will these spacers work? answer nowA These spacers fit all NISSAN XTERRA, FRONTIER 2005-2015
Hello, are those coil spacers or strut extension spacers? And if I use them with bilstein 5100 at 1” set up for 2” total lift, would I need a differential drop kit
- Good afternoon. How well do these work with an OEM Nissan setup? Thanks. Brian
Q Good afternoon. How well do these work with an OEM Nissan setup? Thanks. Brian answer nowA they should work fine
I am looking to squeeze a bigger tire in my wheelwell and need about an inch of lift. Will this "level" my xterra? Or will I need to lift the rear 1" as well?
Also, will this spacer fit on a completely stock front end?
- Can these be used with the Bilstein 5100 adjustables for 2.5-3" lift?
Q Can these be used with the Bilstein 5100 adjustables for 2.5-3" lift? answer nowA You may use it in such combination at your own risk, but please keep in mind that more then 2.5-3'' of total lift amount is not recommended, and that if you have a 4WD truck the ftont differential drop kit will be needed for increasing the CV axles life if front lift exceeds 2''.