OME 2608 HD Front Lift Coils for 2005+ Nissan Frontier & Xterra
N- OME 608
Fits Nissan Xterra, Frontier 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Fits 2005 and Up Frontier and Xterra
-Front Old Man Emu 2608 Heavy Duty Lift springs for ’05 and up Frontier and Xterra
-Provides 1.5″ of front lift when used with an extra 110+ lbs of front weight. Great for aftermarket front bumpers and winch combos!
OME 2608 X Coils
(2) Front 2608 Coil Springs
Questions and answers of the customers
I have the bilstein 5100 adjustable shocks and added 30lb up front could i get away with one up on the adjustment
Q I have the bilstein 5100 adjustable shocks and added 30lb up front could i get away with one up o...... Read more answer nowA I think you can. I just added the ARB bumper to my Xterra and I am running the OME shocks and light duty springs. That bumper is a bit too much for the light duty springs (I lost about a half inch of the original 1.5in), but I think 30lbs can be absorbed by the stock springs. You may not even need to move up on the adjustment.A I plan adding more weight . Some rock sliders next them either bumperbor roll cage.
I added 30 lb skid plate and have the 5100 bilstein adjustables what setting would i have to put it on to get 2 inches on my front end
- What is the spring rate of these coil springs
Q What is the spring rate of these coil springs answer nowA Lift Height (IN): 1.1 Inch Free Length (IN): 15 Inch Spring Rate: 480 Pounds Per Square Inch Finish: Powder Coated Color: Black Material: Steel
I have the Rough Country 2.5 lift, so wouldn't this put me at 4" which isn't recommended using stock UCAs?
- Will these work on the bilsteins on my 2012 pro4x? And what if I already have a 2" lift spacer up front, do I need to remove it? Will the front end be lower than the 2" lifted shackled rear?
Q Will these work on the bilsteins on my 2012 pro4x? And what if I already have a 2" lift spacer up...... Read more answer nowA As it is not recommended to exceed the 3'' of lift not to make harm to the suspension arms and other parts, the 2'' spacers are to be removed. With rear 2'' shackles the rear will be slightly higher when unloaded.
Are these springs compatible with the Bilstein 5100 series, stock spring perches, and stock UCA/LCA setup?
Q Are these springs compatible with the Bilstein 5100 series, stock spring perches, and stock UCA/L...... Read more answer nowA
Yes, they are compatible.
Please keep in mind that these springs will provide 1.5″ of front lift when used with an extra 110+ lbs of front weight or more with stock bumper.
It is not recommended to exceed the 2.5-3'' of total lift using stock UCAs.
Will these Springs work with stock struts
Q Will these Springs work with stock struts answer nowA Unfortunatelly no, stockl shocks will not work. Please use: https://bilsteinlifts.com/shop/nissan-xterra/suspension/front-ome-90003-shocks-for-2005-nissan-frontier-xterra/
I had just put a off road bumper on my truck weighing approx 160 with no winch yet would this bring me back to about stock height