1″ inch Lift Top Plate Spacer for Nissan Xterra, Frontier 2005-2015
1″ inch Lift Top Plate Spacer for Nissan Xterra, Frontier 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Nisstec Lifts T6 aluminum top plate spacer provides about 1″ of lift to your current front coilover system.
Works great with most aftermarket coilovers, OME front lifts, and TJM lift kits.
You will need to source 1/2″ longer hardware for your coilover/OE top mount OR choose the drop down option below for brand new OE style top mounts with longer studs already pressed in.
*These top plate spacers will cause coil bucket contact when used with stock upper control arms
New stock OEM style top plates with longer studs already pressed in are available for an additional $50
*Note actual spacer is 1/2″ . With the geometry of the I.F.S on the Nissans when you add ½” to the top of the coilover is doubles it at the wheel. So in other words ½” Spacer equals out to being 1” of lift at the wheel
Questions and answers of the customers
- Q Hello, are those coil spacers or strut extension spacers? And if I use them with bilstein 5100 at... answer nowAnswered by the admin These spacers are mounted under the top hat on the spring.Yes, diff drop kit is recommended for mote then 1.5'' lift
- Answered by the admin they should work fine
- Q I am looking to squeeze a bigger tire in my wheelwell and need about an inch of lift. Will this "...There are no answers for this question yet. Answer now
- Answered by the admin You may use it in such combination at your own risk, but please keep in mind that more then 2.5-3'' of total lift amount is not recommended, and that if you have a 4WD truck the ftont differential drop kit will be needed for increasing the CV axles life if front lift exceeds 2''.