SuperLift 6″ Lift Kit For 2012-2018 Dodge Ram 1500 4WD Gas and Eco Diesel Models – with Bilstein Front Struts and Rear Shocks
SuperLift 6″ Lift Kit For 2012, 2013, 2014, 2015, 2016, 2017, 2018 Dodge Ram 1500 4WD Gas and Eco Diesel Models – with Bilstein Front Struts and Rear Shocks
- This is a complete knuckle style suspension lift kit for the 2012-2018 Dodge Ram 1500 4wd; providing 6” of lift height
- Includes adjustable 5100 Series Bilstein front struts
- Includes rear coil springs and rear 5100 Series Bilstein shock absorbers
- Covered by our Limited Lifetime Warranty
- This kit also comes in a Superlift Superide rear shock option
- All brackets, cross-members, shocks, steering knuckles, rear coil springs, rear track bar bracket, and hardware required specific to the 2012-2018 4wd Dodge Ram 1500.
- Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
- The best customer service and technical help in the industry.
Superlift’s complete knuckle style suspension lift kit for the 2012-2018 Dodge Ram 1500 4wd, providing 6” of lift height.
- Replacement knuckles yield best possible alignment specs. Front track width is not increased and factory turning radius is retained.
- Front lower control arm crossmembers laser cut from 3/16″ material.
- Belly pan, constructed of 1/4″ material, connects crossmembers and protects differential.
- Front anti-sway bar link extensions retain factory “service for life” links.
- New Superide Dual Rate rear coil springs provide ideal ride, handling and load carrying capability.
- New bracketry relocates factory rear 4-link points, anti-sway bar links, brake lines and track bar.
- New rear compression travel-stop brackets.
- Rear shocks Superide Select (SS) by Bilstein included.
- Installs easily with only slight trimming and no exhaust or driveshaft modifications.
- Compatible with Dodge’s Electronic Stability Program.
- Limited Lifetime Warranty.
- 100% Satisfaction Guarantee.
- Note: Will not fit Short Bed Standard Cab models due to rear driveline vibration.
- Does Fit ECO Diesel
- Note: The Outdoorsman factory ride height is approximately 1″ taller than the standard Ram . Due to the additional height of the Outdoorsman models, the Bilstein front struts packaged with this lift are not recommended to be set at their highest ride height. Possible alignment issues and CV shaft vibration when in 4 wheel drive can occur. Set the snap right in the center groove of the strut to achieve proper ride height.
- Note: Cannot use 17 inch wheels.
Superlift’s 4″ and 6″ Ram lift kits received Chrysler’s Design Award at the 2009 SEMA show, the automotive aftermarket industry’s largest event. With our “best in class” lift, the Ram’s “best in class” driveability remains intact, or arguably, it is improved upon. Lifted ride quality and control are exceptional.
On both lift heights, you have a choice of retaining the factory front strut cylinders, or purchasing Superide SS replacement strut cylinders by Bilstein, which noticeably improve handling at higher speeds. If the factory struts are retained, the lift kit includes Superide rear shocks; SS Bilstein rear shocks are included with the Bilstein SS lift.
With Superlift’s replacement knuckle system, laser-cut bracketry relocates the front lower control arms and differential, and a .25″ thick bellypan protects the vitals while further increasing overall rigidity. For the rear, all 4-link-to-frame attachment points are relocated via one-piece, die-formed brackets and new coil springs (not spacers) ensure proper functionality and ride quality
TIRE & WHEEL INFO:
|37 x 12.5||18 x 9||4.25 – 5||–|
|37 x 12.5||20 x 9||5||–|
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers’ wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
- Installation time: 10 hours
- Difficulty level: 4 of 5
WHAT IS THE DIFFERENCE BETWEEN SUPERIDE AND BILSTEIN SHOCKS?
Superlift Superide shocks are twin tube, velocity sensitive hydraulic shocks. Bilstein shocks are a mono-tube gas pressurized shock. The Superlift Superide shocks are coated with a white paint; the Bilstein shocks are a brushed steel body with a nickel and clear zinc finish. Bilstein shocks are more tuned for the application and offer more precise valving. Additionally, the standard kit reuses the stock front strut; the Bilstein kit replaces the stock strut with the height adjustable Bilstein strut.
Includes Shocks exactly as pictured
Questions and answers of the customers
Is there a way to purchase only the 6” lifted bilsteins ? I already have the 6” super lift installed
- Hola al comprar el kit con amortiguadores bilsten delanteros y traseros, para que la camioneta quede igual que la foto amarilla o azul, el puntal delantero hay que dejar en la misma medida del de fábrica o este puntal hay que darle más recorrido? Ya que por lo que tengo entendido sube hasta 2” más. Acabo de comprar justamente el de 6” con amortiguadores bilsyen delanteros y traseros.
- What is the part number for the rear shocks?
Q What is the part number for the rear shocks?There are no answers for this question yet. Answer now
Are the rear shocks designed for 6” lift, do they provide 6” of lift?
Q Are the rear shocks designed for 6” lift, do they provide 6” of lift? answer nowA rear lift will be smaller than front to keep the truck leveled
Wats the warranty on this lift package
Q Wats the warranty on this lift package answer nowA Covered by Superlift Limited Lifetime Warranty https://superlift.com/warranty-claims-and-returns