Bilstein 5100 0-2.3″ Lift Front, Rear Shocks for 1996-2002 Toyota 4Runner

4.25 out of 5 based on 4 customer ratings
(4 customer reviews )


Found a better price?
SKU: 2x24-248730-2x24-249966 Categories: , , , Brand:


Bilstein 0-2.3″ Height Adjustable Front Lift & 0-2.3″ Rear Lift Shocks for 1996, 1997, 1998, 1999, 2000, 2001, 2002 Toyota 4Runner 4WD/2WD

BILSTEIN B8 5100 series are designed specifically to help your lifted truck, Jeep or SUV reach its pinnacle in ride performance, while supplying the correct tuning and length for your specific lift.

Part: 2×24-248730-2×24-249966

Front: 24-248730, Rear: 24-249966

  • An Extremely Affordable And Practical Alternative To Coil Spring Spacers
  • Superior Monotube Design
  • Utilizes The Vehicle’s Stock Front Coil Springs
  • Zinc Finish With Multi-Layer Unique BILSTEIN Coating For Extreme Protection
  • Self-Adjusting Deflective Disc Valving With Independent Rebound And Compression Tuning
  • Limited Lifetime Warranty



snap ring

location #

with 2″ lift rear coil

spring installed

(Rate = 220lb/in)

with 1.5″ lift rear

coil spacers 


with OE rear 

coil springs

42.3″Do NOT use1.88″

** Ride heights indicated are typical. Actual ride height is influenced by which factory suspension the vehicle is equipped with and its condition; optional equipment and accessories on your vehicle, and other vehicle modifications such as replacement coil springs, wheel and tire combinations, etc.
Modifying/lifting the suspension to your vehicle may raise its center of gravity and may make it more susceptible to loss of control and/or rollover, which may result in death or serious injury. We strongly recommend that you offset the loss of rollover resistance as much as possible by increasing tire track width, and that you equip the vehicle with a functional roll bar and cage system.

Wear seat belts and shoulder harnesses at all times, and avoid situations where a side rollover may occur.

Customers' review

Rated 4.25 out of 5 stars
4 reviews
4 stars 0 0 %
3 stars 0 0 %
1 star 0 0 %

4 reviews for Bilstein 5100 0-2.3″ Lift Front, Rear Shocks for 1996-2002 Toyota 4Runner

  1. 2 out of 5

    I ordered this kit for my 2000 Toyota 4Runner and the rear shocks did not match up I looked all online for a phone number to reach Bilstein and was unable to find one for you please email me back as I would like to speak to you regarding the kit I ordered and paid for

    Was this review helpful to you? 0 of 1 people found this review helpful

  2. 5 out of 5

    I've gotten several sets over the past couple years. Good shock for stock trucks, and the price is right.

    Was this review helpful to you? 2 of 2 people found this review helpful

  3. 5 out of 5

    Awesome Product!! I have purchased 3 sets in the past year for 3 different 4Runners. I love these shocks they ride and perform really well.

    Was this review helpful to you? 8 of 8 people found this review helpful

Add a review

Use one of the allowed file type: jpg,png.

    Questions and answers of the customers

    1. A it will fit. You may use any notch adjustment, 2nd notch will be good for ride . Basicly it is only not recommended to have more then 3'' of lift. You can keep rear stock height
    2. A Please send us photos of the incorrect shocks through email or contact form and order number - we'll get it corrected
    3. A Your old bushings can be reused if they are in a good shape. Othervise new bushings may be purchased You may consider these coils for no additional constant load such as bumpers or winches
    4. A It will lift only the front on stock coils. For rear lift you'll need or without it you'll have stock rear height
    5. A These shocks can be used with 2.5'' lift coils. Please be sure not to exceed 3'' lift
    6. A Yes, you can use these shocks. Use the middle clip setting on the front shocks for leveling
    7. A Yes, it may work. Please don't use highest notches not to acheive more then 3'' of front lift - can be harmful for the suspension
    8. A You are right, rear spacers or stronger coils will be needed for lifting the rear end
    9. A 2.5'' front and rear lift is the maximum recommended length These coils can be recommended:
    10. A Yes, these shocks will fit the stock springs. Front shocks will allow to make your front higher up to 2,5'' on stock height
    11. A theese will fit 2001 Tundra 4.7 4WD
    12. There are no answers for this question yet. Answer now
    13. There are no answers for this question yet. Answer now
    14. There are no answers for this question yet. Answer now
    15. There are no answers for this question yet. Answer now
    16. Answered by the admin No
    17. A No, they will not fit 2WD according to Bilstein

    Send me a notification for each new answer.