Long Travel 2.5-4″ Bilstein 5100 Rear Shocks 1996-2002 Toyota 4Runner

SKU: 9602E703
4.6666666666667 out of 5 based on 9 customer ratings
(9 customer reviews)
Sale!

Description

Long Travel Bilstein 5100 Rear Shocks for 1996, 1997, 1998, 1999, 2000, 2001, 2002 Toyota 4Runner

Part: 9602E703

Includes: 2 Shocks (Qty 2 of 33-313146 (old: 33-187174) )

Extended Length23.5″
Compressed Length14.91″
Rod Diameter1.81″
Upper Mounting StyleStem
Lower Mounting StyleEyelet

These are long travel rear Bilstein 5100 series shocks outfitted to work with your 3rd Gen 4Runner and should only be used with long rear lift coil springs.

If NOT used with coil springs at least as 2.5-4″ long a coils, you will need to hard mount your internal spring bump stops, mount your rear springs to the axle perch, and extend the axle bumps. There is a high possibility of spitting a spring at full droop if you use too short of a coil spring in back.

We still advise checking full compression and droop after install to determine if your 4Runner needs to be bump stopped or if any other mods need to be made to any ABS or brake lines.

The installation of a longer rear brake line is required with these rear shocks.

Includes 2 Shocks

Customer reviews

Rated 4.6666666666667 out of 5 stars
9 reviews

9 reviews for Long Travel 2.5-4″ Bilstein 5100 Rear Shocks 1996-2002 Toyota 4Runner

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      whats the difference between these 5100 vs 5100 land cruiser 80?
    1. 0 votes
      Q whats the difference between these 5100 vs 5100 land cruiser 80? answer now
      A damping what year and generation is your LandCruiser?
    2. Will these work on a 2011 4runner with a 3in lift?
    3. 0 votes
      Q Will these work on a 2011 4runner with a 3in lift? answer now
      A you need those https://www.suspensionlifts.com/shop/lexus/gx460/shocks-gx460/icon-rear-shocks-1-3-inch-lift/ https://www.suspensionlifts.com/shop/toyota-4runner/03-09-4runner/03-09-4runner-shocks/fox-2-0-rear-2-3-inch-lift-shocks-for-toyota-fj-cruiser-4runner/
    4. How much should I extend my break lines by? 5 inches?
    5. 0 votes
      Q How much should I extend my break lines by? 5 inches? answer now
      A up to 3'' lift OEM brake lines are good
    6. I have a 2001 (1st gen) Tacoma. Will these work with old man emu 2.5-3" lift springs in the rear?
    7. 0 votes
      Q I have a 2001 (1st gen) Tacoma. Will these work with old man emu 2.5-3" lift springs in the rear? answer now
      A yes, it will work
    8. Will these work with arb 2891 spring?
    9. 0 votes
      Q Will these work with arb 2891 spring? answer now
      A Better for this spring https://www.suspensionlifts.com/shop/toyota-4runner/1996-2002/rear-lifts-96-02-toyota-4runner/rear-ome-891-coils-for-1996-2002-toyota-4runner/ use these shocks https://www.suspensionlifts.com/shop/toyota-4runner/1996-2002/shocks-96-02-toyota-4runner/bilstein-0-2-rear-lift-shocks-1996-2002-toyota-4runner/ The ones you speak of are too long for this spring
    10. Will these shocks work with OME 890 rear coil springs? 2002 4runner.
    11. 0 votes
      Q Will these shocks work with OME 890 rear coil springs? 2002 4runner. answer now
      A yes, they will work with 3'' rear coils
    12. Will these work with OME 861 on a 3rd gen 4runner
    13. 0 votes
      Q Will these work with OME 861 on a 3rd gen 4runner answer now
      A yes if you have 3-4'' rear lift
    14. What bushing kit do I get to replace the top bushings? I have a 2001 4runner 4WD SR5 with Toytec Super Flex 024RCB coils
    15. 0 votes
      Q What bushing kit do I get to replace the top bushings? I have a 2001 4runner 4WD SR5 with Toytec ...... Read more
      There are no answers for this question yet. Answer now
    16. Will they work on my 1999 pathfinder with 2.5" spacer lift
    17. 0 votes
      Q Will they work on my 1999 pathfinder with 2.5" spacer lift answer now
      A unfortunately no for pathfinder
    18. Will these work on a 2005 4runner with a 3" lift?
    19. 0 votes
      Q Will these work on a 2005 4runner with a 3" lift?
      There are no answers for this question yet. Answer now
    20. will these work on a 1990 4 runner with 2.5 inch lift?
    21. 0 votes
      Q will these work on a 1990 4 runner with 2.5 inch lift? answer now
      A for 1990 we can offer https://www.suspensionlifts.com/shop/toyota-4runner/90-95-toyota-4runner/90-95-toyota-4runner-2wd4wd-3-4-front-3-4-rear-lift-skyjacker-shocks/
    22. Are these the same shocks that are in the Toyota FJ Cruiser 2 inch lift rear rear b8 5100?
    23. 0 votes
      Q Are these the same shocks that are in the Toyota FJ Cruiser 2 inch lift rear rear b8 5100? answer now
      A please send us complete info about your truck as follows: Year Model Sub-model (1500 / 1500HD / etc. ) Drive train (4WD / 2WD) Engine (volume, fuel:gas/diesel) Cab (regular, crew, extended) Lift height ( front and rear lift amount if applicable ) Lift type (spacers, spring coils or specify if anything else was applied for the lift) and we'll try our best to find the proper shocks for your vehicle
    24. Will these work on a 2in lift coil spacer for the rear if I leave the shock at the 2.5 setting
    25. 0 votes
      Q Will these work on a 2in lift coil spacer for the rear if I leave the shock at the 2.5 setting answer now
      A I think it can work with 2'' rear spacer without heavy rear loads, but it will be better to use it with 2,5'' rear lift and more
    26. My 98 4runner has a 3inch rough country lift on it atm. Would these would with my rough country lifted coil springs?
    27. 0 votes
      Q My 98 4runner has a 3inch rough country lift on it atm. Would these would with my rough country l...... Read more answer now
      A Yes if you have rear 3'' lift
    28. Can I adjust them to fit my ome 890x? iv seen post that say the ome 890 are only 2.5” And other post saying 3”!
    29. 0 votes
      Q Can I adjust them to fit my ome 890x? iv seen post that say the ome 890 are only 2.5” And other p...... Read more answer now
      A Shocks are not height adjustable they are just longer then stock will fit from 2,5'' to 4'' rear lift
    30. Is this the Bilstein 4R5100?
    31. 0 votes
      Q Is this the Bilstein 4R5100? answer now
      A It's 5100 series Bilstein
    32. I’m getting some LC 8 wraps for my 98 4runner. Will these work with tabloids coils?
    33. 0 votes
      Q I’m getting some LC 8 wraps for my 98 4runner. Will these work with tabloids coils? answer now
      A Those* instead of tabloids
      A These shocks are: Extended Length (IN): 23-1/2 Inch Compressed Length (IN): 14.91 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: Eyelet Please compare to your old shocks dimensions and mountings (especially collapsed lenght). No less then 2,5'' rear lift is needed for these shocks
    34. im running rear stock lc coils in my 97 4runner, would this fit?
    35. 0 votes
      Q im running rear stock lc coils in my 97 4runner, would this fit? answer now
      A For long travel shocks you need to use at least 2,5'' lift coils or higher
    36. Hi! I‘m having a hard time finding these shocks in Germany. Any chance you could ship overseas? Thx
    37. 0 votes
      Q Hi! I‘m having a hard time finding these shocks in Germany. Any chance you could ship overseas? T...... Read more answer now
      A Please specify your full postal address
    38. Is this product priced as a set or each individually?
    39. 0 votes
      Q Is this product priced as a set or each individually? answer now
      A

      Priced per set.

    40. Hi - Will these work with OME 890 rear springs? Or, should I just get the regular Bilstein 5100 shocks?
    41. 0 votes
      Q Hi - Will these work with OME 890 rear springs? Or, should I just get the regular Bilstein 5100 s...... Read more answer now
      A Yes, it will work for 3'' rear lift
    42. Will these work on a stock height 4Runner?
    43. 0 votes
      Q Will these work on a stock height 4Runner? answer now
      A No, needs minimum 2,5'' lift or more
    44. I have 3" toytec lift springs in the rear of my 1998 4runner. Should I use these or just the 2.5" bilstein 5100 lift shocks?
    45. 0 votes
      Q I have 3" toytec lift springs in the rear of my 1998 4runner. Should I use these or just the 2.5"...... Read more answer now
      A These shocks will be good for 3'' lift
    46. Are these the same shocks that fit a 1st generation Land Cruiser?
    47. 0 votes
      Q Are these the same shocks that fit a 1st generation Land Cruiser? answer now
      A No, these shocks are: Extended Length (IN): 23-1/2 Inch Compressed Length (IN): 14.91 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: Eyelet will fit 2010-2017 Toyota 4Runner 2010-2014 Toyota FJ Cruiser
    48. Will this work on a 1997 2WD V6 SR5 model?
    49. 0 votes
      Q Will this work on a 1997 2WD V6 SR5 model? answer now
      A Yes, 1996-2001 are the same style 4runners. Should work regardless of 4wd or not.
    50. Does this work on 1999 4Runner 2wd?
    51. 0 votes
      Q Does this work on 1999 4Runner 2wd? answer now
      A Yes
      A Yes. Please take measurements of your shocks and compare to these: Collapsed Length (IN): 14.91 Extended Length (IN): 23.5 to be sure

    Send me a notification for each new answer.

    -

    $199.99

    More than 30 available

    More than 30 available

    1-3 Day Transit Time