ICON 0-3.5″ Lift Kit Stage 1 for 2010-2020 Toyota 4Runner, FJ Cruiser

SKU: K53061

Base Price: $1,947.54 $1,854.80

Only 2 left in stock

Only 2 left in stock

2-5 Day Transit Time


ICON Stage 1 0-3.5″ Lift Kit for 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Toyota 4Runner, 2010, 2011, 2012, 2013, 2014 FJ Cruiser

Part: K53061


This is our entry level suspension system for the 2010-UP Toyota 4Runner. The Stage 1 system works well in most on and off-road scenarios by significantly improving factory body roll and overall driving ability. ICON 2.5 Series front coilover shocks feature a vehicle-specific tune to give your Toyota 4Runner great ride quality on or off-road, and they are adjustable from 0 to 3.5″ of lift. Our rear 2.0 Aluminum Series shocks in this system are tuned to match the front 2.5 Series coilovers in every aspect, providing smooth and consistent damping performance front to rear. This system is finished off with a pair of 2″ lift rear coil springs that have been engineered to further improve ride quality and handling.


  • We recommend the use of our #56100 shock shin guards to reduce the chance of shock shaft damage. These shocks are located in a vulnerable position that allows debris to easily come in direct contact with the shock shaft.
  • KDSS Equipped vehicles require 54200 Rear Adjustable Track Bar

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8-8.5″ Wide, 4.75″ Backspace

Aftermarket Tires: 33″ x 11.25

(Larger tires may fit but fender trimming and modifications will be required)



52700 (QTY.1) | 07-UP FJ/03-UP 4RUNNER REAR 2″ SPRING KIT



58451DJ | Tubular Delta Joint upper control arms

58551DJ | Billet Delta Joint upper control arms

56100 | ICON Rear shock shin guards

54000 | Billet lower adjustable link arms

54100 | Billet upper adjustable link arms

54200 | Adjustable track bar

52800 | ICON Overland Series dual rate 3″ lift rear coil springs

56104 | Rear hydraulic bumpstop kit

191011 | ICON tubular upper control arm cover caps

198000 | ICON 2 pin spanner wrench

NOTE: Spanner wrench for adjustment is not included. Please purchase 198000 Spanner Wrench.

Customer reviews


There are no reviews yet.

Be the first to review “ICON 0-3.5″ Lift Kit Stage 1 for 2010-2020 Toyota 4Runner, FJ Cruiser”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

    1. 0 votes
      A ICON 3" Rear Lift Overland Dual Rate Coils (52800) (+$50)|50 fit for 2010-2020 TOYOTA 4RUNNER, FJ CRUISERYou may need to adjust the front coilovers to get the lift you need.
    2. 0 votes
      A usually not needed, but as every truck has some individual front/rear height and load can't guarantee that slight height adjustment will not be needed at allfronts are usually preset at about 2.8-3'' (depends on truck)
    3. 0 votes
      A yes, as front coilovers are height adjustable
    4. 0 votes
      A This is our entry level suspension system for the 2010-UP Toyota 4Runner and 2010-2014 FJ CruiserFit for 2018 Toyota 4RunnerSYSTEM COMPONENTS:  52700 (QTY: 1) | 07-UP FJ/03-UP 4RUNNER REAR 2" SPRING KIT 56505 (QTY: 2) | 07-UP FJ/03-UP 4 RUNNER 1-3" REAR 2.0 VS IR 58646 (QTY: 1) | 10-UP FJ/4RUNNER 2.5 VS IR COILOVER KIT
    5. 0 votes
      A No If you have 4RUNNER we can offer https://www.bilsteinlifts.com/shop/toyota-4runner/2010-2019/icon-extended-travel-front-coilovers-2010-2018-toyota-4runner/
    6. 0 votes
    7. 0 votes
      A Yes, it will work
    8. 0 votes
      A Yes, it will work for 2010+ 4Runner 2WD and 4WD
    9. 0 votes
      A It's the manufacturers'data - maybe for stability or bearings lifte increase. We haven't tested suc wheels by ourselves and always recommend test fitmenf first
    10. 0 votes
      A UCA's are recommended but not require, the benefit of the UCA's is to  fix the caster when the vehicle is getting aligned and also helps you a  lot with articulation on the front end.

    Send me a notification for each new answer.

    You may also like…