ToyTec 0.25″ thick Front Lift Top Plate Single Spacer approx 1/2″ Lift

SKU: TP14
4.6 out of 5 based on 15 customer ratings
(15 customer reviews )
Found a better price?

$37.99

In Stock

Description

ToyTec 0.25″ thick Front Lift Top Plate Single Spacer (approx 1/2″ Lift)

Part: TP14

Top plate spacer adds approximately 1/2″ lift.

Great for correction of drivers side ride height.

Includes 1 spacer.

Questions and Answers

-Where exactly does this spacer install? Is it between the spring and cap, or on top of everything?

-It sits on top of everything.

-Can it install by itself to correct drivers side lean, or does it only work on top of other spacers?  Does it require longer studs?

No, you can use it separately for driver’s side lean. And it does not require longer studs.

Spacer installation instruction

*WILL NOT FIT 5 Lug Tacoma

15 reviews for ToyTec 0.25″ thick Front Lift Top Plate Single Spacer approx 1/2″ Lift

    Add a review

    Use one of the allowed file type: jpg,png.

      Questions and answers of the customers

      1. 0 votes
        Answered by the admin The lean can vary from truck to truck. You can use one spacer at the side if you need to, or change coilover preset
      2. 0 votes
        Answered by the admin Hello Yes it will work on 2003 Lexus GX470
      3. 0 votes
        Answered by the admin Diff drop kit is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.   UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.These spacers add 0.5'' of lift - just please be sure not to exceed 3'' total lift
      4. 0 votes
      5. 0 votes
      6. 0 votes
      7. 0 votes
      8. 0 votes
        Answered by the admin Yes, you may ride as as but to prevent tire vear alignment is recommended
      9. 0 votes
        Answered by the admin It is possible but is not recommended to have more then 3'' of total lift - can be harmful for the suspension
      10. 0 votes
        Answered by the admin You may do it but it will not increase ride quality.Leveling shocks * * * https://bilsteinlifts.com/shop/toyota-tacoma/1995-2004/bilstein-5100-0-2-front-lift-shocks-96-02-toyota-tacoma-4wd/ * * * are better
      11. 0 votes
        Answered by the admin Yes it's possible.Please be sure not to have total more then 3'' of lift.More then 3'' of lift can be harmful for the suspension
      12. 0 votes
        Answered by the admin Yeds, this spacer provides 1/2'' of lift. The spacer itself is thinner then 1/2''
      13. 0 votes
        Answered by the admin Yes, it will fit
      14. 0 votes
        Answered by the admin Bolts will not be needed.Mybe precise castercamber adjustmebt or some trimming will also help - depends on your tires and rims parameters
      15. 0 votes
        Answered by the admin Yes, it can be used, but it is not recommended to exceed total 3'' of lift. Maybe beter to use it on top of 2.5'' spacers
      16. 0 votes
        Answered by the admin Yes, it will fit 1st gen 6-lug Tacoma
      17. 0 votes
        Answered by the admin Maybe only one at single side should be used.Please remember not to exceed 3'' of total lift - can be harmful for the truck
      18. 0 votes
        Answered by the admin Yes, it ill fit 2013 FJ
      19. 0 votes
        Answered by the admin Can't recommend anything for magnetic suspension - the electroncs will not understand the spacer and will try to correct it
      20. 0 votes
        Answered by the admin We think it may be possible, but it is not recommended to stack lifts - we haven't tested the mix of different manufacturers' spacers will work
      21. 0 votes
        Answered by the admin We think it may be possible, but it is not recommended to stack lifts - we haven't tested the mix of different manufacturers' spacers will work
      22. 0 votes
        Answered by the admin This TP14 plate spacer will give between 1/4 - 1/2 inch of lift on the front end of the vehicle. They will fit on a 2016 4Runner SR5 for sure
      23. 0 votes
        Answered by the admin Yes. Please write "2004 pre-runner" in additional notes when ordering
      24. 0 votes
        Answered by the admin it is not recommended to use for 2017 Tacomas because they are already factory lifted by 1'' and for them the total recommended lift amount without using aftermatket UCAs, cv axles modifications and other must not exceed 2''
      25. 0 votes
        Answered by the admin Yes, it may be used. Please keeo in mind not to exceed total amount of lift by 3''. Also please keep in mind, that more then 2'' of front lift for 4WD the diff drop kit is recommended.
      26. 0 votes
        Answered by the admin Yes, it can be used
      27. 0 votes
      28. 0 votes
        Answered by the admin Yes, you can use it. It is recommended to take measurements of left and right sides first, because on some trucks drivers side sits slightly lower and passengers - slightly higher. And only one spacer can be required in such cases.Please keep in mind to measure the bolts length - to have the bolts with the proper length to fit the spacers.
      29. 0 votes
        Answered by the admin Yes, these shocks can be used with spacers with corresponding (not bigger) lift.
      30. 0 votes
        Answered by the admin Yes, it can be used. Please take some measurements of your truck before - sometimes the passengers side of some trucks sits higher then the drivers, and you may need only one spacer then ( depending on the height measured). Please keep in mind that any side lift withoust serious suspension upgrades is not recommended to be higher then 3''.
      31. 0 votes

      Send me a notification for each new answer.