MetalTech4x4 OffRoad Rock Sliders/Rails for 200 Series Toyota Land Cruiser

Metal Tech 4×4 200 Series Sliders for the Land Cruiser with Metal Tech’s signature two stage rub rail design.

Main Body: The CAD developed sliders are built on an “aircraft wing” type of construction. The outer “skin” or shell is precision laser cut 3/16” steel and formed on CNC forming equipment. On the inside of the 200 Series Land Cruiser Metal Tech sliders there is a combination of ¼” and 3/16” inner ribs support the outer shell. This produces and extremely rigid, relatively light weight main body for the slider. The forming of the slider shell also allows for it to flow with the rounded lines of the 200.

Rub rail:  The outside of the slider has a two-stage rub rail. The aft portion of the rub rail is 1.5” further outward that the front half. This area of the slider will push the back end of your truck away from the obstacle you are traversing (This helps save your ¼ panel)!

Mounting:  Each side uses two main points distributed down the body of the slider.  Each mounting point bolts solid to the frame.

These are finished with a complete wash, pre-bake and sandblast before the coat of semi-gloss black powder coat are sprayed and baked on. Both the inside and the outside of the 200 Series Land Cruiser Metal Tech sliders are powder coated, the only ones in the industry like this. The new Metal-Tech 200 Series sliders truly are “Protection Evolved”.

Features:

• Protection in extreme off road use
• 100% Precision Laser Cut and Formed Steel
• 2 Stage Rub Rail
• Powder Coated Inside and Out
• Bolt-on installation

Estimated Install Time: 1.5 hours