SuperLift 4″-5″ Suspension Lift Kit for 1988-1995 Toyota Pickup

SKU: K306

Description

SuperLift 4″-5″ Suspension Lift Kit for 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Toyota Pickup (EXCEPT short bed standard cab 89-95 Pickup Models)

Part: K306

  • Full-width differential / lower control arm crossmembers provide lateral rigidity
  • Precision cast steering knuckles included
  • Load bearing bracketry made of .25″ thick steel plate and/or heavy wall rectangular tubing
  • Front and rear Superlift Superide shocks included
  • Includes front brake hose relocation hardware
  • Optional front skid plate protects differential steering linkage
  • Lifetime Warranty
  • Satisfaction Guarantee

Tire and Wheel Info

33 x 12.50″ tire on 8″ wheel with 3.25 to 3.75″ backspacing

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.

Actual dimensions of a given tire size can vary considerably from one brand to another.

Manufacturers’ wheel offset and backspacing measurement points are not always consistent.

Backspacing greatly impacts tire-to-fender clearance when turning.

Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.

Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.


Installation Notes

Brake line / hose relocating hardware included in kit box.

Requires new wheels with backspacing of 3.25″ min. / 3.75″ max.


Product Overview

Like most IFS trucks, the Toyota uses upper and lower control arms supported by torsion bars. What makes the Toyota IFS suspension unique is that the torsion bars run along the top of the frame rails and connect to the upper control arms which means the torsion bars cannot be relocated.

Front lift is achieved by lowering the lower control arms via one-piece crossmember assemblies. Since the upper control arms must remain in their factory location, new precision cast knuckles bridge the increased distance between the upper and lower control arms. The front differential housing is lowered to keep CV axle angles in check, sway bar relocation brackets, bump stop extensions, brake hose and E-brake relocations brackets are also provided.

The kit is packaged complete with Superlift Superide shocks.

Optional lower crossmember-to-frame braces, and front skidplate are available.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “SuperLift 4″-5″ Suspension Lift Kit for 1988-1995 Toyota Pickup”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Do you ship to guam?
    1. 0 votes
      Q Do you ship to guam?
      There are no answers for this question yet. Answer now
    2. Is this lift for the 2.5" rear lift brackets
    3. 0 votes
      Q Is this lift for the 2.5" rear lift brackets answer now
      A Includes brackets, cross-members, knuckles, shocks, rear block and u-bolt kit, and hardware required specific to the 1993-1996 Toyota T-100 Pickup
    4. will this fit the 2wd? i see the other 4-5" says 4wd
    5. 0 votes
      Q will this fit the 2wd? i see the other 4-5" says 4wd answer now
      A specified for 4WD Pickups only
    6. It says it'll fit and 95 but will it fit a 99 extended camp regular bed
    7. 0 votes
      Q It says it'll fit and 95 but will it fit a 99 extended camp regular bed answer now
      A Unfortunatelly we have no suspension lift kits for 1997-1999 Toyota Pickup

    Send me a notification for each new answer.

    -

    $1,099.99

    In stock

    In stock