Bilstein 5100 0-2.8″ Front, 0-1″ Rear Lift Shocks for 2001-2007 Toyota Sequoia

SKU: 24-261425_24-276061
4.8333333333333 out of 5 based on 6 customer ratings
(6 customer reviews)
Sale!

Description

Bilstein 5100 0-2.8″ Front & 0-1″ Rear Lift Shocks for 2001, 2002, 2003, 2004, 2005, 2006, 2007 Toyota Sequoia

Need them assembled?

Front Shocks:

Series: 5100

Front Extended Length(in): 18.35

Front Collapsed Length(in): 13.23

Part Number: 24-261425

Front Shocks Fitment Notes: Front Lift Height: 0-2.8″; Without Electronic or Self-Leveling Suspension

Rear Shocks:

Series: 5100

Rear Extended Length(in): 23.96

Rear Collapsed Length(in): 15.06

Part Number: 24-276061

Rear Shocks Fitment Notes: For Rear Lifted Height: 0-1″; Without Self-Leveling or Electronic Suspension

Fitment: Bilstein 5100 0-2.8″ Front & 0-1” Rear Lift Shocks for 2001-2007 Toyota Sequoia

Important fitment notes: Will NOT work on vehicles with air suspension
Includes 4 Shocks

Customer reviews

Rated 4.8333333333333 out of 5 stars
6 reviews
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

6 reviews for Bilstein 5100 0-2.8″ Front, 0-1″ Rear Lift Shocks for 2001-2007 Toyota Sequoia

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Can i use OME 887 springs with the 5100 on stock setting?
    1. 0 votes
      Q Can i use OME 887 springs with the 5100 on stock setting? answer now
      A yes, only on the lowest clip we can offer coilovers assembled with 887
    2. Will these work with a stock 4wd 2003 sequoia?
    3. 0 votes
      Q Will these work with a stock 4wd 2003 sequoia? answer now
      A yes, will work
    4. If I put the 2.8” on the front and the 1” on the rear of a 2001 Sequoia will I need to change out the OEM upper control arms? Lower control arms?
    5. 0 votes
      Q If I put the 2.8” on the front and the 1” on the rear of a 2001 Sequoia will I need to change out...... Read more answer now
      A UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end. rear shocks will not lift the truck by themselves
    6. for the 1"rear shock, will it work with a 2.5" coilover?
    7. 0 votes
      Q for the 1"rear shock, will it work with a 2.5" coilover? answer now
      A rear lift does not depend on front leveling amount so it will work
    8. I have an 06 Sequoia 4wd...looking to lift front 2.5" & the back whatever height needed to level. Will this kit work? Will rear shocks work with small spacer on top of rear coils?
    9. 0 votes
      Q I have an 06 Sequoia 4wd...looking to lift front 2.5" & the back whatever height needed to le...... Read more answer now
      A front shocks can be used to lift the front of the truck. These shocks can be used with a stock spring. Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y517A00_1.pdf Rear shocks can be operated with 0-1 inch lift. If you are using small spacer on top of rear coils then these shocks will do. In order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.suspensionlifts.com/level.png
    10. If I put the 2.8” on the front and the 1” on the rear will I need to change out the OEM original coil springs that have 280,000 miles on them? Are there any other parts that I need to change as a result of this lift? Any parts I should consider changing at this time?
    11. 0 votes
      Q If I put the 2.8” on the front and the 1” on the rear will I need to change out the OEM original ...... Read more answer now
      A you can keep your old coils if they are in a good shape or order new OEM coils
    12. Will these rear shocks work on OME 2862 rear springs?
    13. 0 votes
      Q Will these rear shocks work on OME 2862 rear springs? answer now
      A rear shock may appear to be too short
      A rear shock may appear to be too short
    14. Hello I have a 2007 sequoia limited with the rear air suspension an I was wondering if 5100 0-2.8” shocks would work on it?
    15. 0 votes
      Q Hello I have a 2007 sequoia limited with the rear air suspension an I was wondering if 5100 0-2.8...... Read more answer now
      A Front shocks 0-2.8″ can only work with the stock coil! Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y517A00_1.pdf
    16. At 2.8" front and 1" on the back will my Sequoia be level? Will that 2.8" front and 1" back = a small lift for my sequoia which will still be level? or would I need to be on the middle clip for the front and 0 on the back to be level?
    17. 0 votes
      Q At 2.8" front and 1" on the back will my Sequoia be level? Will that 2.8" front and 1" back = a s...... Read more answer now
      A In order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.suspensionlifts.com/level.png if using stock rear coils - usually middle clip setting is used for the front for leveling
    18. What notch the front shocks are set to at the pictures of sequoia?
    19. 0 votes
      Q What notch the front shocks are set to at the pictures of sequoia? answer now
      A middle clip is used for leveling, higest notch will give 2.8'' front lift on the picture also rear lift is installed
    20. Can you ship to Japan?
    21. 0 votes
      Q Can you ship to Japan? answer now
      A Hello Yes Рlease send us complete info about you full shipping address to get a shipping quote as follows: First name, Last name Company (not necessary) Address line City Postcode / ZIP Country State/ County Email address Phone
    22. Can I use these shocks for a Sequoia with Electronic Leveling? If not, which shock should I use?
    23. 0 votes
      Q Can I use these shocks for a Sequoia with Electronic Leveling? If not, which shock should I use?
      There are no answers for this question yet. Answer now
    24. Can i use this kit with some other springs to get a 3 inch lift for the 2005 sequoa. I wan to remove the factory air bags.
    25. 0 votes
      Q Can i use this kit with some other springs to get a 3 inch lift for the 2005 sequoa. I wan to rem...... Read more
      There are no answers for this question yet. Answer now

    Send me a notification for each new answer.

    -

    $468.79

    More than 30 available

    More than 30 available

    1-3 Day Transit Time