ToyTec BOSS 0-3″ Lift Suspension System for 1995-2004 Toyota Tacoma

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

Base Price: $1,139.99

Found a better price?
SKU: TTBOSSTAC-955 Categories: , , Brand:



Toytec BOSS Suspension System

Fits All 1995.5 to 2004 Tacomas 4WD and 2WD Prerunner (6 lug wheels)

Designed for the best overall ride comfort and performance in mind, this complete lift kit is the best lift on the market.

ToyTec’s new BOSS front coilover is designed with a larger 5/8” Nitro steel shock shaft which is much more corrosion resistant than chrome plating and is valved specific to your vehicle. This improves overall handling and performance. The threaded Clear-Blue Chromate zinc plated steel shock body is adjustable from 0-3” of front lift height and can be fine tuned to level your truck side to side and front to back. They have a 200 psi gas charge and each shock is dyno’d before it is shipped.

Fits Toyota Tacoma 1995.5, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

Upper mounts and adjustment rings are machined from 6061-T6 Billet aluminum and are then anodized black to prevent corrosion. Long handled TIG welded spanner wrenches are included for easy adjustment. We only use Eibach springs for our coilovers which means you have the best name and quality in the business supporting your vehicle. Comes fully assembled and ready to bolt on. All parts are 100% made in the U.S.A.

Adjustable from 0-3” of front lift

  • Choose coil spring rates below.

500 lb/in Silver Eibach Coils for Reg Cab 2.7L Tacoma’s

550 lb/in Silver Eibach Coils ideal for stock front weight Extra Cab Tacoma’s or those looking for great compression in the rocks.

600 lb/in Eibach (Red or Silver) will handle the extra weight of a front bumper and winch.

650 lb/in Eibach (Red or Silver) for extreme front weight or high speed wheeling.

  • TAC-DR – When installing a lift on your truck, the angles of the front CV axles will increase the higher you lift it. At 3 inches of lift, the CV joints will operate at considerable angle which will increase wear on the CV joints and the rubber boots. The front differential drop kit will reduce the angle placed on the CV axles thereby reducing wear on those components.


  • Choose Rear Lift Options Below:

– Toytec 2” lift rear Add-A-Leafs. This long style AAL offers a great ride and has anti-friction pads already installed. Comes with (2) new center bolts.

– Toytec 2” rear lift shackles. These shackles are made to withstand even the toughest conditions! 2″x3/8″ steel legs, heavy-duty cross member welded in for extra support, and zinc plated for a long lasting finish.

– 1.5” rear lift blocks with zinc plated heavy duty 9/16” U-bolts

– Old Man Emu Dakar rear leaf springs-

**NOTE: Complete Rear OME Dakar Spring Upgrade. Choose your year in drop down below, ’98-’04 OR ‘95.5-’97
Includes bushings, New longer U-Bolts, and additional shipping to the 48 states, Alaska and Hawaii will have additional shipping charges due, we will call with additional shipping total.

  • TAC9604R – 2 New extended length rear Boss Shocks
  • BPV-K – Brake proportioning valve extension bracket is needed for proper brake operation after lifting. Aluminum Bracket and Grade 8 zinc plated hardware included

NOTE: Toytec Lifts Suspension parts do not fit 5 wheel lug Tacoma’s. Please check your application before ordering.

Download Installation instructions for 1996-2004 Toyota Tacoma BOSS Kit

1 review for ToyTec BOSS 0-3″ Lift Suspension System for 1995-2004 Toyota Tacoma

  1. Rated 5 out of 5

    Pineflakes (verified owner)

    Definitely pleased. Wished I installed sooner. My Taco has 150K miles on the suspension as a work truck and mild off road vehicle, so it needed new suspension, but the slightly stiffer ride from the kit is better than new stock. I was worried that increased center of gravity would make truck more unstable, especially with a load of lumber on the rack, but it handles corners better with less roley-poley side to side swaying.

    As for the install, it was fairly easy. Definitely need a friend to help installing add-a-leaf springs, and someone to pass wrenches makes everything go faster regardless. The skid plates did not fit after adding differential drop kit, even with the spacers provided, so I had to add extra washers and drill out mounting holes in rear skid plate to get it to line up. Also, I highly recommend getting a longer rear soft brake line (Toytec sells one 4″ longer). The OEM brake line has enough length with weight on the suspension, but if you let the axle hang or catch air on a bump, I worry it could rupture. I also have air helper springs, so I could tear the hose if the springs were pumped to a high PSI to level the truck carrying a bunch of concrete, and then rupture after offloading.

Add a review

Questions and answers of the customers

  1. Answered by the admin They do not come installed, they will be to be installed to the upper control arm, instructions are included inside of the box. They are super easy to install, just 2 washers and 1 bolt that needs to be torque to spec. As soon as the installation is done we recommend to add 5-10 pumps of ball joint grease and then re grease the ball joints every oil change (2-3 pumps of grease)
  2. Answered by the admin Stock brake lines will be good for up to 3'' of lift. I would add longer break lines only in case of heavy offroading just to be on the safe side
  3. Answered by the admin It is not recommended to have more then 3'' of lift without changing many suspension, steering and other parts in order not to damage stock parts or have troubles when driving
  4. Answered by the admin 550 lb/in Silver Eibach Coils ideal for stock front weight Extra Cab Tacoma’s (if you don't have an aftermarket reinforced bumper or a winch)
  5. A How much to ship to hawaii

Send me a notification for each new answer.