ToyTec 0.25″ thick Front Lift Top Plate Single Spacer approx 1/2″ Lift

4.60 out of 5 based on 15 customer ratings
(15 customer reviews )

$37.99

Found a better price?

Description

ToyTec 0.25″ thick Front Lift Top Plate Single Spacer (approx 1/2″ Lift)

Part: TP14

Top plate spacer adds approximately 1/2″ lift.

Great for correction of drivers side ride height.

Includes 1 spacer.

Questions and Answers

-Where exactly does this spacer install? Is it between the spring and cap, or on top of everything?

-It sits on top of everything.

-Can it install by itself to correct drivers side lean, or does it only work on top of other spacers?  Does it require longer studs?

No, you can use it separately for driver’s side lean. And it does not require longer studs.

Spacer installation instruction

*WILL NOT FIT 5 Lug Tacoma

15 reviews for ToyTec 0.25″ thick Front Lift Top Plate Single Spacer approx 1/2″ Lift

  1. 5 out of 5

    Toytec 1/4 “ spacer fixed my 2017 Tacoma , driver side lean.

    Was this review helpful to you? 1 of 1 people found this review helpful

  2. 5 out of 5

    Got mine in two days and it was easy to install and fixed the Taco lean I had. Thanks for such an easy fix.

    Was this review helpful to you? 1 of 1 people found this review helpful

  3. 5 out of 5

    Fit perfectly. Nicely made. We'll packed. Quick ship.
    2009 Tacoma Prerunner 4.0 liter

    Was this review helpful to you? 1 of 1 people found this review helpful

Add a review

Use one of the allowed file type: jpg,png.

    Questions and answers of the customers

    1. A Yes, you may ride as as but to prevent tire vear alignment is recommended
    2. A It is possible but is not recommended to have more then 3'' of total lift - can be harmful for the suspension
    3. A You may do it but it will not increase ride quality. Leveling shocks * * * https://bilsteinlifts.com/shop/toyota-tacoma/1995-2004/bilstein-5100-0-2-front-lift-shocks-96-02-toyota-tacoma-4wd/ * * * are better
    4. A Yes it's possible. Please be sure not to have total more then 3'' of lift. More then 3'' of lift can be harmful for the suspension
    5. A Yeds, this spacer provides 1/2'' of lift. The spacer itself is thinner then 1/2''
    6. A Bolts will not be needed. Mybe precise castercamber adjustmebt or some trimming will also help - depends on your tires and rims parameters
    7. A Yes, it can be used, but it is not recommended to exceed total 3'' of lift. Maybe beter to use it on top of 2.5'' spacers
    8. A Yes, it will fit 1st gen 6-lug Tacoma
    9. A Maybe only one at single side should be used. Please remember not to exceed 3'' of total lift - can be harmful for the truck
    10. A Yes, it ill fit 2013 FJ
    11. A Can't recommend anything for magnetic suspension - the electroncs will not understand the spacer and will try to correct it
    12. A We think it may be possible, but it is not recommended to stack lifts - we haven't tested the mix of different manufacturers' spacers will work
    13. A We think it may be possible, but it is not recommended to stack lifts - we haven't tested the mix of different manufacturers' spacers will work
    14. A This TP14 plate spacer will give between 1/4 - 1/2 inch of lift on the front end of the vehicle. They will fit on a 2016 4Runner SR5 for sure
    15. A Yes. Please write "2004 pre-runner" in additional notes when ordering
    16. A it is not recommended to use for 2017 Tacomas because they are already factory lifted by 1'' and for them the total recommended lift amount without using aftermatket UCAs, cv axles modifications and other must not exceed 2''
    17. A Yes, it may be used. Please keeo in mind not to exceed total amount of lift by 3''. Also please keep in mind, that more then 2'' of front lift for 4WD the diff drop kit is recommended.
    18. A Yes, you can use it. It is recommended to take measurements of left and right sides first, because on some trucks drivers side sits slightly lower and passengers - slightly higher. And only one spacer can be required in such cases. Please keep in mind to measure the bolts length - to have the bolts with the proper length to fit the spacers.
    19. A Yes, these shocks can be used with spacers with corresponding (not bigger) lift.
    20. A Yes, it can be used. Please take some measurements of your truck before - sometimes the passengers side of some trucks sits higher then the drivers, and you may need only one spacer then ( depending on the height measured). Please keep in mind that any side lift withoust serious suspension upgrades is not recommended to be higher then 3''.

    Send me a notification for each new answer.
    ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov