Bilstein 5100 adjustable 0-2.5″ front, rear shocks 1995-2004 Toyota Tacoma 4WD/2WD

SKU: 9504BILK
5 out of 5 based on 18 customer ratings
(18 customer reviews)

Description

Bilstein 5100 Height Adjustable Front Shocks and Matching Rear Shocks

9504BILK

Fits Toyota Tacoma 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

Front and rear Bilstein 5100 shocks

Front D558 height adjustable shocks can be set at 0, 1.25, and 2.5 inches of lift with the factory coils
Extended length: 18.64″
Collapsed length: 13.39″

Rear D560 extended length 5100 Bilstein shocks work great with 0 to 2 1/2″ lift.

– – – –

2 x F4-BE5-D558-T0

F4-BE5-D559-T0, F4-BE5-D560-T0

– – – –

 

Rear shocks:

F4-BE5-D559-T0 Extended length: 21.63″ Collapsed length: 13.93″ (Driver side)
F4-BE5-D560-T0 Extended length: 22.57″ Collapsed length: 14.65″ (Passenger side)

 

NOTE: Front shocks do not include upper bushings or washers.

 

Will not fit 5 wheel lug Tacoma’s. Please check your application before ordering.

need a full lit kit?

Customer reviews

Rated 5 out of 5 stars
18 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

18 reviews with rating of 5 stars (18 of 18)

(Show unfiltered results)

18 reviews for Bilstein 5100 adjustable 0-2.5″ front, rear shocks 1995-2004 Toyota Tacoma 4WD/2WD

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      I have a Tacoma 2000 regular cab with a 2.4 engine and 5 lugs, with stock suspension I would like to lift it 2.5", will this kit work for me?
    1. 0 votes
      Q I have a Tacoma 2000 regular cab with a 2.4 engine and 5 lugs, with stock suspension I would like...... Read more answer now
      A No It will not fit If you have 5-lug we can offer only https://www.suspensionlifts.com/product-category/toyota-tacoma/1995-2004/1995-2004-5-lug-tacoma/
    2. Will this fit 2004 Tacoma 5 lug?
    3. 0 votes
      Q Will this fit 2004 Tacoma 5 lug?
      There are no answers for this question yet. Answer now
    4. will these work on a 2002 prerunner specifically 3.4L v6?
    5. 0 votes
      Q will these work on a 2002 prerunner specifically 3.4L v6? answer now
      A Yes! Will work perfect.
    6. I have a 2002 TACO prerunner 4dr, stock hieght , if I put 5100's front and rear and leave to lowest hieght settings would that need a new coil?or anything else like bushings for front
    7. 0 votes
      Q I have a 2002 TACO prerunner 4dr, stock hieght , if I put 5100's front and rear and leave to lowe...... Read more answer now
      A You can reuse the stock coils, and you only need to replace the bushings if they’ve gone bad
    8. I am trying to find the certain bushings I'm going to need to install these. Do you have a link or anything where I can find them?
    9. 0 votes
      Q I am trying to find the certain bushings I'm going to need to install these. Do you have a link o...... Read more
      There are no answers for this question yet. Answer now
    10. Do the front shocks come with the protection covers?
    11. 0 votes
      Q Do the front shocks come with the protection covers? answer now
      A they come as pictured generic boots can be purchased if desired https://www.suspensionlifts.com/shop/nissan/nissan-xterra/2-pro-comp-black-boots-shocks/
    12. I have new coils, and a completely stock 1995 tacoma. I just want a small lift. Other than the bushings for the front, is there anything else ar all I need to achieve around a 2" lift?
    13. 0 votes
      Q I have new coils, and a completely stock 1995 tacoma. I just want a small lift. Other than the bu...... Read more answer now
      A nothing more is needed as far as you have  6-lug Tacoma. for the front SOme rear lift options such as 1'' blocks can be offered
    14. I can't seem to find the bushing kit on here for the front shocks on the bilstein 5100 adjustable?
    15. 0 votes
      Q I can't seem to find the bushing kit on here for the front shocks on the bilstein 5100 adjustable? answer now
      A you can reuse your old bushings if they are in a good shape or order OEM bushings from Toyota
    16. Will this fit my 1999 Tacoma 4X4 6 lug pickup? and if so is it required to have a drop kit for the CV axles?
    17. 0 votes
      Q Will this fit my 1999 Tacoma 4X4 6 lug pickup? and if so is it required to have a drop kit for th...... Read more answer now
      A yes, it will fit Diff drop kit is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.  
    18. Thank you for taking my question. I have a completely stock ‘03 Tacoma TRD 4x4 V6 Double Cab. I’m searching for the best method to level out the truck as it has that factory rake to it to compensate for weight in the bed or trailering. I’m thinking the 5100 adjustables would be perfect for the front but unsure if I can reuse the factory coils, what setting on the c clip to use, and if I need to do anything in the rear to maintain level? The truck has 29,000 original miles so I think the coils have some life left . But if they’re not usable I’m open to replacements if you could provide part numbers. Thanks
    19. 0 votes
      Q Thank you for taking my question. I have a completely stock ‘03 Tacoma TRD 4x4 V6 Double Cab. I’m...... Read more
      There are no answers for this question yet. Answer now
    20. What coils do you recommend? I want to change out my stock coils. I have 99 4x4 single cab Toyota Tacoma. I do plan on using the 1” Toytec blocks to get it level with front, I’m not sure what coils to get for getting it level.
    21. 0 votes
      Q What coils do you recommend? I want to change out my stock coils. I have 99 4x4 single cab Toyota...... Read more answer now
      A we can offer https://www.suspensionlifts.com/shop/toyota-tacoma/1995-2004/front-lifts-and-coilovers-95-04-tacoma/toytec-eibach-3-front-lift-coil-springs-for-1995-2004-toyota-tacoma/ https://www.suspensionlifts.com/product-category/toyota-tacoma/1995-2004/?swoof=1&pa_product-type=coils&really_curr_tax=33-product_cat
    22. Can I use these with ome 881
    23. 0 votes
      Q Can I use these with ome 881 answer now
      A Yes, on the lowest notch adjustment
    24. will the springs and top mounts off of Rancho RSL 9000 quicklift shocks fit these shocks?
    25. 0 votes
      Q will the springs and top mounts off of Rancho RSL 9000 quicklift shocks fit these shocks?
      There are no answers for this question yet. Answer now
    26. What is the torque spec on the rear shock?
    27. 0 votes
      Q What is the torque spec on the rear shock? answer now
      A Please use OEM specs
    28. I have a 1999 Toyota tacoma sr5 with 5 lug wheels, would this kit work. Also are there struts on the front end because it doesnt look like it to me.
    29. 0 votes
      Q I have a 1999 Toyota tacoma sr5 with 5 lug wheels, would this kit work. Also are there struts on ...... Read more answer now
      A Nevermind I missed the part saying it wont fit.
      A For 5-lug we can offer only such shocks * * * https://suspensionlifts.com/shop/toyota-tacoma/1995-2004/1995-2004-5-lug-tacoma/bilstein-4600-front-rear-shocks-1995-2004-toyota-tacoma-5-lug-2wd/
    30. Will these work with stock oem springs
    31. 0 votes
      Q Will these work with stock oem springs answer now
      A It worked for me, I used the stock springs on my 04 Tacoma Extended Cab 4x4
      A Yes, will work, Front shocks are height adjustable and are able to lift the front end on stock coils up to 2,5'' rear shocks are just longer then stock but will not lift the rear end by themselves
      A I emailed Bilstein directly and I was told there 5100 rear shocks will not work with stock height vehicles
    32. If I stack a 6 inch rough country spacer on these? And if so how will it ride?
    33. 0 votes
      Q If I stack a 6 inch rough country spacer on these? And if so how will it ride? answer now
      A it will ride but it is not recommended to stack lifts so can be used on lowest notch adjustment in order not to overlift the truck
    34. Is this setup good to use on a 2001 4x4 single cab Tacoma? Also, do you recommend the diff drop as well?
    35. 0 votes
      Q Is this setup good to use on a 2001 4x4 single cab Tacoma? Also, do you recommend the diff drop a...... Read more answer now
      A Diff drop kt is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.   For single cab please use no more then 3rd notch adjustment - it might gove you about 3'' of additional lift depending on your trucks additional weight.
    36. can you use these on a 98 tacoma with 2.5 in front spacers if so would you leave them at stock height
    37. 0 votes
      Q can you use these on a 98 tacoma with 2.5 in front spacers if so would you leave them at stock he...... Read more answer now
      A Yes it's possibelr. Also you can remove spacers and set them at 2,5''
    38. Does it matter if you install the rear shocks boot up or Down?
    39. 0 votes
      Q Does it matter if you install the rear shocks boot up or Down?
      There are no answers for this question yet. Answer now
    40. Will I need to/should use an aal in the rear with these? Looking at the toytec progressive aal. I'm putting a small kit together I wanted the toytec 3" bilsten lift kit but I have a 2.7 4x4 ext. cab and no extra front weight..
    41. 0 votes
      Q Will I need to/should use an aal in the rear with these? Looking at the toytec progressive aal. I...... Read more answer now
      A 5100s front shocks are height adjustable and are able to lift the front using stock coils. For rear lift you'll need blocks or add a leafs, you are right
    42. Will this kit work for stock height 2004 Tacoma extended cab 4x4
    43. 1 vote
      Q Will this kit work for stock height 2004 Tacoma extended cab 4x4 answer now
      A Yes, it will work with stock height. As front shocks are height adjustable they'll allow to lift the front up to 2,5'' using stock coils if you'll want to
    44. Will these front shocks fit OME 883 coils?
    45. 0 votes
      Q Will these front shocks fit OME 883 coils? answer now
      A You may use it with OME cols, but better to use with stock or 112-620 coils. * * * https://suspensionlifts.com/shop/toyota-fj-cruiser/toyota-fj-cruiser-2010-2011-2012-2013/front-lifts/toytec-eibach-front-coil-lift-springs/ * * * OME coils are to be used with OME shoks
    46. Hello will these fit a stock 2002 crew crab prerunner v6? I see some notes saying a 1” lift block must be added or is that not necessary for replacing prerunner rear shocks?
    47. 0 votes
      Q Hello will these fit a stock 2002 crew crab prerunner v6? I see some notes saying a 1” lift block...... Read more answer now
      A It's not necessary. The rear shocks can fit either 0'' rear lift (stock height) or 1'' rear lift
      A After installing the rear shocks on a 0" stock rear end (04 prerunner DC V6), the shocks bottomed out a few times as they are very compressed. Unless your rear leafs have zero sag, I recommend a rear lift or bump stop extensions.
    48. which shock part number goes on the rear drivers side? rear passenger side? Thanks, Darin
    49. 0 votes
      Q which shock part number goes on the rear drivers side? rear passenger side? Thanks, Darin answer now
      A D559 - Driver side, D560 - Passenger side
    50. I have the F4-BE5-D560-T0 rear shocks included in this kit. What is the extended and compressed length of the shocks?
    51. 0 votes
      Q I have the F4-BE5-D560-T0 rear shocks included in this kit. What is the extended and compressed l...... Read more answer now
      A F4-BE5-D559-T0 Extended: 21.63" Collapse: 13.93" F4-BE5-D560-T0 Extended: 22.57" Collapse: 14.65"
    52. I have an 04 tacoma TRD 4x4 can I use this strut with a 3 inch spacer lift
    53. 0 votes
      Q I have an 04 tacoma TRD 4x4 can I use this strut with a 3 inch spacer lift answer now
      A Yes, you can do it, but these shocks allow to remove spacers and have the same lift using shocks adjustment. Please note, that having more then 3'' of lift will not be good for the cv axles, control arms and the suspension - that's why it is not recommended to use 3'' spacers with some adjustments except the lowest
    54. will these fit a 98 prerunner not 4x4, stock height all the way around. i need new shocks and do not plan on lifting the truck. maybe leveling at some point though. also what setting would i need to put it on to level the truck. thanks
    55. 0 votes
      Q will these fit a 98 prerunner not 4x4, stock height all the way around. i need new shocks and do ...... Read more answer now
      A Yes, it will fit. Please take measurements from the ground to the front and rear fender lines to find out how much front lift is needed for leveling.
    56. I have a 2000 Tacoma and I just bought 33inch tires. What would I need to clear them? I don't wanna do a six inch. People preferred me to get this set up. What's your recommendations
    57. 0 votes
      Q I have a 2000 Tacoma and I just bought 33inch tires. What would I need to clear them? I don't wan...... Read more answer now
      A

      We always recommend test fitment before.
      Generally using aftermarket longer UCAs is always not the bad idea, but first you cat try
      - lifting up to 3'' (more lift will make harm to the stock suspension oarts)
      - precisely adjustinc castor and chamber at about 1-1.5-2 dregee may help
      - maybe wheel spacers (depending on your rims and suspension condition)

      https://suspensionlifts.com/shop/toyota-land-cruiser/80-series-toyota-land-cruiser/spidertrax-wheel-spacers-fj-tacoma-4runner/
      or
      https://suspensionlifts.com/shop/toyota-fj-cruiser/spidertrax-wheel-spacers/

      Please don't forget about diff drop kit if you have a 4WD
      https://suspensionlifts.com/shop/toyota-4runner/1996-2002/front-differential-drop-kit-1995-2004-toyota-tacoma-02-4runner-06-tundra-sequoia-4x4/

    58. Will I still have that rake look?
    59. 0 votes
      Q Will I still have that rake look? answer now
      A You may set the front D558 height adjustable shocks 0, 1.25, and 2.5 inches of lift with the factory coils. If you have rear lift 1'', then setting the front height adjustable shocks to a 2,5'' will level your truck and you'll have no rake look.
    60. Will these shocks work on a 2WD '03 Tacoma Pre-Runner? Other sites show them as 4WD only
    61. 0 votes
      Q Will these shocks work on a 2WD '03 Tacoma Pre-Runner? Other sites show them as 4WD only
      There are no answers for this question yet. Answer now
    62. I recently bout a 07 Tacoma. Looking to put new shocks. It's has a 3" lift. Blocks in the back and spacers in the springs up front. Which shocks will I need to fit with the lift? Thank you.
    63. 0 votes
      Q I recently bout a 07 Tacoma. Looking to put new shocks. It's has a 3" lift. Blocks in the back an...... Read more answer now
      A

      Thanks for the details provided. These shocks https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/bilstein-height-adjustable-5100-front-and-rear-5100-shock/ may fit the 2007 Tacoma if you had slightly lower (0-2.5'' front and 0-2'' rear) lift. For the rear we have: https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/shocks-05-15/toytec-boss-rear-shocks-2005-2014-tacoma-00-06-tundra/, for the front you may use Bilstein 5100 ride height adjustable Please keep in mind, that this kit is for a 6 Lug Tacoma 4WD. If you have 2WD Tacoma please specify it, the cab size and the engine.

    64. Could I use these shocks with the old man emu 882 coils on a Fabtech 6in lift?
    65. 0 votes
      Q Could I use these shocks with the old man emu 882 coils on a Fabtech 6in lift? answer now
      A It is strictly not recommended to stack lifts. And unfortunatelly these shocks will be too short for that.
    66. How do i get replacement shocks for the lift i purchased from you!!. Its a 1997 tacoma. I have the billstin coilovers 3" lift
    67. 0 votes
      Q How do i get replacement shocks for the lift i purchased from you!!. Its a 1997 tacoma. I have th...... Read more
      There are no answers for this question yet. Answer now
    68. How much does this package weigh?
    69. 0 votes
      Q How much does this package weigh? answer now
      A 22lb
    70. How are the front struts adjustable? would i need to purchase aftermarket upper control arms also?
    71. 0 votes
      Q How are the front struts adjustable? would i need to purchase aftermarket upper control arms also? answer now
      A Front struts can be set at 0, 1.25, and 2.5 inches of lift with the factory coils. UCAs not required, but may be installed additionally.
    72. Will these work on stock height 03 tacoma front and rear?
    73. 0 votes
      Q Will these work on stock height 03 tacoma front and rear? answer now
      A Front shocks can lift the vehicle, rear shocks can't and you need rear lift 1-2.5" in order to use the rear shocks
      A
      Front shocks can lift the vehicle, rear shocks can't and you need rear lift 1-2.5" in order to use the rear shocks
      Suspensionlifts.com can offer you some items for rear lift starting with 1″ Rear Lift Block https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/complete-lift-kits-tacoma-05-and-up/pro-comp-1-rear-lift-block-u-bolt-kit-1995-2014-toyota-tacoma-tundra-1999-2014/ . After installing the shocks you've chosen and the rear 1'' lift block you can gain 2,5'' front lift and 1'' rear lift, whick will level your truck. Please keep in mind, that such lift blocks are recommended for use in case you don't carry heavy loads and do no towing.
    74. Is it possible to mount these on a 5 wheel lug 1996 Toyota Tacoma with a 1.5" add a leaf?
    75. 0 votes
      Q Is it possible to mount these on a 5 wheel lug 1996 Toyota Tacoma with a 1.5" add a leaf? answer now
      A Unfortunately not.
    76. Will these shocks and struts work with a 5" Tuff Country lift?
    77. 0 votes
      Q Will these shocks and struts work with a 5" Tuff Country lift? answer now
      A

      No, you would need longer shocks.

    78. Do these shock fit factory mounts on truck rear .750 dia. Also are the oem springs for the front avalible and the deleting spacer that goes in the wheel well.
    79. 0 votes
      Q Do these shock fit factory mounts on truck rear .750 dia. Also are the oem springs for the front ...... Read more answer now
      A

      If you have 6 lug, front and rear shocks will fit factory mounts. Front shocks can be used with OEM coils and front shocks are height adjustable.

    80. Do you sell this kit with rear shocks for a stock height 98 Tacoma 4x4?
    81. 0 votes
      Q Do you sell this kit with rear shocks for a stock height 98 Tacoma 4x4? answer now
      A Unfortunately not.

    Send me a notification for each new answer.

    You may also like…

    -

    $489.00

    In stock

    In stock