Bilstein 5100 0-2″ Front, 1″ Rear lift shocks for 1995-2004 Toyota Tacoma

SKU: 95TacKB
3.3333333333333 out of 5 based on 3 customer ratings
(3 customer reviews)
Sale!

Description

Bilstein 5100 0-2″ Front, 1″ Rear lift shocks for 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Toyota Tacoma

Part: 95TacKB

Fits 6 Lug Only.

Front:

Collapsed Length (IN): 13.86
Extended Length (IN): 18.66
Collapsed Length (MM): 352.0
Extended Length (MM): 474.0
Finish: Zinc Plated
Reservoir: No
Body Design: Snap Ring Grooved Body (Coilover)
Body Diameter: 46mm

Rear left:

Collapsed Length (IN): 13.62
Extended Length (IN): 21.26
Collapsed Length (MM): 346.0
Extended Length (MM): 540.0
Finish: Zinc Plated
Reservoir: No
Body Design: Smooth Body (Non-Coilover)
Body Diameter: 46mm


Rear right:

Collapsed Length (IN): 14.07
Extended Length (IN): 22.09
Collapsed Length (MM): 357.5
Extended Length (MM): 561.0
Finish: Zinc Plated
Reservoir: No
Body Design: Smooth Body (Non-Coilover)

Body Diameter: 46mm

1″ REAR BLOCK KIT – Toyota TUNDRA / TACOMA 1995-2019:

Toyota Tundra/Tacoma 1″ Rear Block Kit – 2WD/4WDOEM cast iron rear lift blocks with u-bolts
Fits both Tundra and Tacoma trucks
Tacoma 1995-2019
Tundra 1999-2019

Customer reviews

Rated 3.3333333333333 out of 5 stars
3 reviews

3 reviews for Bilstein 5100 0-2″ Front, 1″ Rear lift shocks for 1995-2004 Toyota Tacoma

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Will these kit fit a 2002 2WD Tundra Access Cab? The blocks say they will, but what about the shocks?
    1. 0 votes
      Q Will these kit fit a 2002 2WD Tundra Access Cab? The blocks say they will, but what about the sho...... Read more answer now
      A for Tundra we can offer https://www.suspensionlifts.com/shop/toyota-tundra/00-06-toyota-tundra/complete-lift-kits-00-06-toyota-tundra/bilstein-5100-height-adjustable-front-rear-shocks-for-2000-2006-toyota-tundra/ https://www.suspensionlifts.com/shop/toyota-tundra/2007-2019-toyota-tundra/rear-lifts-2007-2019-toyota-tundra/readylift-1-rear-block-kit-for-1999-2020-toyota-tundra/
    2. It seems so with this kit , but can you verify please , that this a solution to completing an overall 2” lift to a stock 03 Tacoma TRD? Thank you !
    3. 0 votes
      Q It seems so with this kit , but can you verify please , that this a solution to completing an ove...... Read more answer now
      A yes, it will be good (as far as you have TRD sport or TRD offroad, not TRD PRO)
    4. Can you use the stock, factory coils for this setup ? Thank you.
    5. 0 votes
      Q Can you use the stock, factory coils for this setup ? Thank you. answer now
      A You can use the front shocks with stock springs. In order to get different lifting heights, you need to rearrange the rings on the strips, as shown in the installation instructions Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y489A00.pdf
    6. Can this setup be used with the factory coils ?
    7. 0 votes
      Q Can this setup be used with the factory coils ? answer now
      A You can use the front shocks with stock springs. In order to get different lifting heights, you need to rearrange the rings on the strips, as shown in the installation instructions Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y489A00.pdf
    8. would this fit a 2000 4runner?
    9. 0 votes
      Q would this fit a 2000 4runner? answer now
      A No it will fit on 1995-2004 TOYOTA TACOMA
    10. Part number 2x24-249928_33_247724_33-247717_66-5001 the question is which coil springs could I use to obtain zero lift in the front
    11. 0 votes
      Q Part number 2x24-249928_33_247724_33-247717_66-5001 the question is which coil springs could I us...... Read more answer now
      A For level 0, you must use the OE COIL SPRING at the lowest position of the clip in the groove We will send you a link to the instructions for using this shock. https://productdesk.cart.bilsteinus.com/media/products/bilstein/E4-WM5-Y489A00.pdf
    12. Does this come with all the bushings/spacers needed to do the entire job? I know another set that you are selling required you to purchase those separately.
    13. 0 votes
      Q Does this come with all the bushings/spacers needed to do the entire job? I know another set that...... Read more answer now
      A Front shocks come without bushings. You may reuse your old ones or purchase new if needed * * * https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/accessories-2016-and-up/front-shock-replacement-bushing-washer-kit/
    14. Will this not fit 2017 Tacoma Trd sport?
    15. 0 votes
      Q Will this not fit 2017 Tacoma Trd sport? answer now
      A Here are shocks for 2017 Tacoma * * * https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/shocks-2016-and-up/bilstein-0-2-lift-front-shocks-0-1-lift-rear-shocks-2016-2017-toyota-tacoma/

    Send me a notification for each new answer.

    -

    $607.05

    More than 30 available

    More than 30 available

    1-3 Day Transit Time

    • We recommend to add diff drop kit for vehicles with 4x4