OME 2.5-3″ lift kit for 2005-2015 Toyota Tacoma
Complete Old Man Emu / ARB suspension for Toyota Tacoma 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
- Front Shocks:
- Front OME 90000 sport shocks – Recommended for 110-220LBS additional front weight.
- Front OME 90021 sport shocks -Recommended for 2005-2015 Tacoma stock front weight, Not for use with 886 coils.
- Front coils:
- 2884 coils for std and x cab models
- 2885 coils for D cab and additional weight
- 2886 coils for 200+ lbs. front weight from aftermarket bumper or winch
Rear Lift – Choose Standard or Heavy
- EL111R (old: EL095R) – Standard Dakar Leaf Pack – Approximately 2.5″ of lift
- EL112R (old:EL096R) – Heavy Dakar Leaf Pack – 300 Kgs/661 Lbs. Constant Load – Approximately 2.5″ of lift
- 1.5″ Add a Leaf
- New longer u-bolts included if needed
- Also Includes:
- Rear OME Nitrocharger Sport 60091 shocks
- Choose Front diff drop kit for 4×4 models from drop down
- OME trim spacer for a level front. (ome95PF5)
- FK29 – Rear carrier bearing drop fit kit
- Optional Stone Guards to help protect the rear shocks from stone chip damage and to help maintain the finish.
*This kit will not work on a 2wd 5-Lug Tacoma.
Questions and answers of the customers
are you guys using stock UCA's because i have almost no clearance from the coil over and the stock UCA. has anyone ran into this problem ?
Q are you guys using stock UCA's because i have almost no clearance from the coil over and the stoc...... Read more answer nowA UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
I have some questions. Recently bought a 2008 tacoma d-cab 6ft bed. I know nothing about leaf springs. But it's got the EL095R springs in the rear. Wanting to lower the rear about 1"- 1.5" or so. Truck sits a little too high in the rear for me. What to do? Take out a leaf? But which one? Put stock spring back in? But what is the stock spring number? I don't know what to do. Any info would be greatly helpful.
- I have a 2013 Tacoma TRD Pro extended cab. My suspension is stock (OEM) Id like a 2 inch lift and not much more, still want it to fit in the garage; and I have 4.5 inches of clearance now. I also pull a tear drop off road trailer and have air bags on the truck. what should I look for in a 2-3 inch lift?
- Is ride-height adjustable on this OME setup? As in, can each coil-over unit be adjusted for height by tensioning the spring, or is it only adjustable via shims?
- Can I run a top plate spacer without sacrificing performance to get a full 3” of front lift?
Q Can I run a top plate spacer without sacrificing performance to get a full 3” of front lift?
Hello. I have a 2011 Double Cab Toyota Tacoma, Base 4WD. 1) will I need replacement UCAs if I want to go 3" with this lift? 2) stock weight, will the 885 coils give me a 3" lift on this truck with no spacers?
- Good afternoon. I have. Stock 2012 Tacoma TRD off road double cab with 136k miles. I am looking at replacing the suspension with this kit and adding a front bumper + winch, 285/75/R16 tires, and a camper shell/bed drawers in the near future. Intent is to use the truck for moderate off-road trails for camping, hunting, fishing, etc...what set up would you recommend to accommodate? I was thinking 886 coils, HD leaf pack with a 3” lift. Any input would be appreciated, thanks.
Q Good afternoon. I have. Stock 2012 Tacoma TRD off road double cab with 136k miles. I am looking a...... Read more answer nowA If you plan to put a bumper and a winch, then on the front we recommend you order 886 coils for 200+ lbs. front weight from aftermarket bumper or winch. This stiff spring compensates for extra weight if you will add a constant weight to the rear, we advise you to consider options for tightening springs EL111R (old: EL095R) - Standard Dakar Leaf Pack - Approximately 2.5 ″ of lift or EL112R (old: EL096R) - Heavy Dakar Leaf Pack - 300 Kgs / 661 Lbs. Constant Load - Approximately 2.5 ″ of lift
2009 double cab 4x4 sr5. What do I need. Going to add a arb front bumper so I'm guessing the 886s and possibly adding arb rear bumper later. I'm confused about what rear leafs I need or if I just need the add a leaf option. Thank you
Q 2009 double cab 4x4 sr5. What do I need. Going to add a arb front bumper so I'm guessing the 886s...... Read more answer nowA 885 coils will be good for not very heavy bumper without winch 886 will be better for heavier bumper and winch. Rear AALs are recommended for carrying heavy loads and towing heavy trailers. if riding empty - shackles or blocks will give more comfort than AALs
This is a review, not a question. I can’t leave it in the actual review section though. I just installed on my 2010 off-road. There is definitely some grinding necessary on the rear shocks. I ground almost a quarter inch off each shock. Everything else is a great fit. The instructions that came with my kit were for the AAL, but I had the Dakar springs. I have front armor and a 9k winch and it rides great with that weight. I highly recommend this to anyone, even 2015s.
- Are your prices in CAD or US dollars?
Q Are your prices in CAD or US dollars? answer nowA Priced in USD
I have 08 regular cab Tacoma, 4wd, 2.7L. I need tips on what to order for front 3” and rear 2” thanks again for any help
Q I have 08 regular cab Tacoma, 4wd, 2.7L. I need tips on what to order for front 3” and rear 2” th...... Read more answer nowA We'd recommend 884 coils with top plate spacers if you have no additional constant load such as bumper or winch. For the rear 2'' add a leafs will be good if your leaf springs are in a good shape
2013 Trd offroad why don't you recomend the spacer plate while using the 886
Q 2013 Trd offroad why don't you recomend the spacer plate while using the 886 answer nowA We and/or ARB don't recommend the top plate spacer because the 886 spring is the heaviest spring that OME offers for this particular vehicle. If the top plat spacer is added damage might occur to the shock
I have a 2015 tacoma and was wondering what the other options are on where I should look. I like the options of this package but would very much prefer not to grind the shock housing.
Q I have a 2015 tacoma and was wondering what the other options are on where I should look. I like ...... Read more answer nowA We can offer these kits with no grinding https://www.bilsteinlifts.com/shop/toyota-tacoma/2005-2015/3-lift-kit-with-bilstein-5100-coilovers/ https://www.bilsteinlifts.com/shop/toyota-tacoma/2005-2015/toytec-boss-suspension-system-2005-2015-toyota-tacoma/
I have a 2017 TRD Sport DCLB with 285/70/17 tires will this setup work for me?
Q I have a 2017 TRD Sport DCLB with 285/70/17 tires will this setup work for me? answer nowA Such wheels will work without rubbing Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger wheels may require some trimming or sheel spacers. Also precise caster/camber adjustment may help
I have a 2007 Tacoma TRD Offroad DCSB i want to install a rack and rtt. i'm thinking 3" lift with 270/80-16 i don't plan on having a constant load of 660lbs i want to keep the truck level maybe have a aftermarket bumpers in the future. will this kit be the right fit. i don't plan on extreme off-road just camping and fishing away from people.
- What if I plan to add a winch in the future can I install 886 coils without the extra weight
Q What if I plan to add a winch in the future can I install 886 coils without the extra weight answer nowA 886 coils will give you same 3'' of front lift with or without front additional weight. They are just stiffer then other coils and your ride will become less comfort if riding without additional constant load
Does this kit account for “taco lean”?
Q Does this kit account for “taco lean”? answer nowA OME trim spacer is included for a lean fixing (10m thickness)
Is there also a fitment issue with the ToyTec's Boss Shock on the 2015's or is the fitment issue only with the 60091?
- Has the fitment issue with 2015's been resolved for the 60091?
Q Has the fitment issue with 2015's been resolved for the 60091? answer nowA Unfortunately it has not being resolved yet, still requires a little grinding on the shock housing
Does the 3 leaf pack come with bushings and is it the ARB OME model number CS033RB?
Q Does the 3 leaf pack come with bushings and is it the ARB OME model number CS033RB? answer nowA The TT-MINIL14 does not need bushings, it includes some friction pads
I have a 2009 xcab 2.7L 4Cyl manual 4x4 Tacoma , what are the recommended options for this lift-kit for a leveled 3”
Q I have a 2009 xcab 2.7L 4Cyl manual 4x4 Tacoma , what are the recommended options for this lift-k...... Read more answer nowA 884 front coils if not having aftermarket bumper or winch or some other additional weight + rear 1.5'' blocks if not towing heavy trailers. Add a lef will be better for towing but will not look like leveled when empty
I have a 2008 Toyota Tacoma 2WD base model. I want this lift but I want the front to be a little higher than the back to give it the baja style look. How can I accomplish this with this lift kit?
- 06 prerunner access cab, looking for 3 inches of lift and I want the front and rear to look leveled what do I select
Q 06 prerunner access cab, looking for 3 inches of lift and I want the front and rear to look level...... Read more answer nowA Front coil springs depending on your additional constant load: 884 coils for std and extended cab models 885 coils for D cab and additional weight 886 coils for 200+ lbs. front weight from aftermarket bumper or winch Add top plate spacers for full 3'' lift. For the rear - please use blocks or 2'' add a leafs to look leveled
Looking to get this kit with the complete Dakar leaf pack, I'm wanting the leveled look without the top spacers what coils should I run?
Q Looking to get this kit with the complete Dakar leaf pack, I'm wanting the leveled look without t...... Read more answer nowA Front coils: Choose from options: 884 coils for std and x cab models 885 coils for D cab and additional weight 886 coils for 200+ lbs. front weight from aftermarket bumper or winch 884 and 885 coils will give you approximately 2.5''+ of height - they differ in spring rate, not on lift height
Looking to buy this kit for my 2006 trd sport tacoma. I'm gonna be using the stock 17" rim. Will a 285/70 tire fit on this rim?
- I have a 2009 access cab 2.7l and I do not want to exceed 3in is this kit ok?
Q I have a 2009 access cab 2.7l and I do not want to exceed 3in is this kit ok?
Can this lift work for my 2008 fj cruiser 2 wheel dr?
Q Can this lift work for my 2008 fj cruiser 2 wheel dr? answer nowA No only for the Tacoma
Whats the lift height on this without the front spacers for a 2006 DCSB? Not neccessarily looking for a full 3", would prefer to stay around 2.
Q Whats the lift height on this without the front spacers for a 2006 DCSB? Not neccessarily looking...... Read more answer nowA The OME springs will provide you with no less then 2.5'' front lift even without spacers. For 2'' lift please see this https://bilsteinlifts.com/shop/toyota-tacoma/2005-2015/bilstein-adjustable-lift-kit-with-5100-shocks/ kit.
Do you have a customer service phone number?
Q Do you have a customer service phone number?
I have a 2013 standard cab. What is the lift with 884 coils and no blocks or spacers? I don't really want 3" - would actually prefer closer to 1.5". Would this improve the ride/handling vs. stock suspension? I don't plan to put on tires bigger that 265/75/R16, just looking for a slight lift and better on and off road handling characteristics.
Q I have a 2013 standard cab. What is the lift with 884 coils and no blocks or spacers? I don't rea...... Read more answer nowA This kit will not give you less then 3'' lift for the standart cab even on 884 coils. Please consider this https://bilsteinlifts.com/shop/toyota-tacoma/2005-2015/bilstein-height-adjustable-5100-front-and-rear-5100-shock/ kit - it can be regulated to 1.5'' lift or slightle more if you'll need in future. You can start with the 3rd clip and go from there. Another option would be to buy adjustable coil overs and adjust them to desire lift. Yes it would be a good idea to gen an alignment done after adjusting vehicle height. Please see the scheme in the answers lower on the page the link for which I've provided.
Looking for a 3" suspension lift for my 2006 Tacoma TRD. What would be the recommended tire size after installation. Was looking at 305-70-R16. Do you think this tire is to large for a 3" lift?
Q Looking for a 3" suspension lift for my 2006 Tacoma TRD. What would be the recommended tire size ...... Read more answer nowA We haven/t tested such tires, but we know that 275-285 width fits orther Tacomas with similar lift. Please keep in mind, that it'll depend on the truck load, wheel rims offset and other particular car suspension qualities.
I am looking for this lift for a 2017 TRD Off-Road. What are my options if this only goes to 2015? I would like an OME suspension and this is my price range.
Q I am looking for this lift for a 2017 TRD Off-Road. What are my options if this only goes to 2015...... Read more answer nowA
This is the only thing we have: https://bilsteinlifts.com/shop/toyota-tacoma/2016-and-up/2016-lift-kits/2-arb-ome-lift-kit-2016-toyota-tacoma/
I have a stock 2015 TRD double Cab sport, short bed. on 235/85/16 tires.
I am adding a heavy bumper and winch to the front. Heavy duty bump for the back, sliders and underplates. I am looking at the OME package with 886 coils and Add a Leaf (trying to keep cost down)
I am hoping to keep close to stock height due to where I park. Do you have a rough estimate what the overall cab height of the truck will be?
Q Hello, I have a stock 2015 TRD double Cab sport, short bed. on 235/85/16 tires. I am adding a hea...... Read more answer nowA
With this particular application i would recommend to get adjustable coil overs on the front and set them up to 1 1/2 or depending on the weight of the bumper and winch. OME 886 will give the vehicle close to 3" of lift and keep in mind that OME suspensions are not adjustable. 112-620 coil will give approximately 1 1/2 of lift and it will work with the stock shock. I don't know what will be the cab height after the lift, every vehicle is different and We don't know how heavy the bumper
or winch is.
Hello shipping to Canada l6p-4c7 Brampton Ontario
For this kit also if I want this kit to be full 3" lift what's the best option for rear ?