ICON 0-2.75″ Lift Kit Stage 1 for 2016-2021 Toyota Tacoma
ICON 0-2.75″ Lift Kit Stage 1 for 2016, 2017, 2018, 2019, 2021 Toyota Tacoma
ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are height adjustable from 0-2.75” of lift allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2016-UP Toyota Tacoma 4WD/PreRunner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
- Increased wheel travel and ride quality over stock
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers provide 0-3.5″ of lift height
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8″ shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series rear IFP shock with 5/8″ shaft
- Bolt-on system means no cutting or welding necessary for install
WHEEL & TIRE FITMENT INFO:
OEM Wheels & Tires: Yes
Aftermarket Wheels: 8.5″ Wide, 4.75″ Backspace
Aftermarket Tires: 33 x 11.50
(Larger Tires May Fit but Fender Trimming and Modifications will be Required)
58630 (QTY.1) | 05-UP TACOMA 2.5 VS IR COILOVER KIT
56503 (QTY.2) | 05-UP TACOMA 4WD 0-1.5″ REAR 2.0 VS NR
191011 | Uni Ball Cover Cap for Tubular UCA
191003 | Short Coilover Wraps
198000 | Spanner Wrench
56103 | 2005-UP Tacoma Rear Air Bump Kit
56105 | Rear Stiker Kit for U-Bolt Flip
58450 | Tubular Uniball UCA Kit
58550 | Billet Uniball UCA Kit
614500 | Uniball Service Kit
51100 | 1.5″ rear Progressive add a leaf Pack
ICON 1.5″ Lift Rear Expansion Pack Add a Leaf 1995-2021 Toyota Tacoma(12 reviews)$214.95 Add to cart
ICON 2 pin Spanner Wrench – ALL ICON Coilover Shocks(0 reviews)$39.95 Add to cart
ICON Tubular Uniball Upper Control Arm Billet Cover Caps(0 reviews)$49.95 Add to cart
ICON Rear Hydraulic Air Bumpstop System for 2005-2021 Toyota Tacoma(0 reviews)$664.95 Add to cart
ICON U-bolt Flip Striker Plate for 2005-2015 Toyota Tacoma(0 reviews)$69.99 Add to cart
Questions and answers of the customers
Do these work on a 2020 Toyota Tacoma OF
Q Do these work on a 2020 Toyota Tacoma OF answer nowA yes, it works for 2020 Taco
Does this stage 1 kit include sway bar relocation brackets?
Q Does this stage 1 kit include sway bar relocation brackets? answer nowA Sway bar relocation kit is included
Will this fit a 2016 2wd 6 lug?
Q Will this fit a 2016 2wd 6 lug? answer nowA Yes sir it will fir 2wd 6-lugA yes it will fit both 2wd and 4wd 6-lug
Will this set of lift will level my truck stance?
Q Will this set of lift will level my truck stance? answer nowA Yes, your truck will be more leveled with height adjustable coilovers. In order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.bilsteinlifts.com/level.png
Will it ride really stiff if i adjust the coilovers to 2 3/4 of threads showing?
Q Will it ride really stiff if i adjust the coilovers to 2 3/4 of threads showing? answer nowA Hello they are set from factory at 2.5-2.75” of lift. They are tuned for optimal ride quality. It may be stiff compare to Bilstein shocks, but ride quality is always subjective.
Would this lift kit fit 33x12 tires with 18.10(-24 offset) wheels?
Q Would this lift kit fit 33x12 tires with 18.10(-24 offset) wheels? answer nowA Such wheels will fit without rubbing: Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming. Also precise castercamber adjustment may help
Would this fit if I had a 3 in lift kit on the truck already.
Q Would this fit if I had a 3 in lift kit on the truck already.There are no answers for this question yet. Answer now
I understand getting up to 2.75” with the adjustable coil overs, but the rear... it’s only shocks. How that works?
Q I understand getting up to 2.75” with the adjustable coil overs, but the rear... it’s only shocks...... Read more answer nowA Rear shocks will not lift your truck by themselves - some lift kit options as add-a-leafs or longer coils or maybe spacers will be required for a lift. These shocks are only longer then the stock shock - designed for use with the existing lift.
Do you recommend UCA's with stage 1 kit?
Q Do you recommend UCA's with stage 1 kit? answer nowA UCA's are recommended but not require, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end. The kits up to 3'' can go without UCAs
Do I need a diff drop?
Q Do I need a diff drop? answer nowA Diff drop kit is recommended for lifts at 1,5'' and higher. Basicly tou can go without it and have little more ground clearance, but cv axles life will be longer wen using diff drop kit.
What size tires fit after the lift
Q What size tires fit after the lift answer nowA Aftermarket Wheels: 8-8.5″ Wide, 4.75″ Backspace Aftermarket Tires: 33 x 11.50
This will fit a 2006 5 lug Tacoma
Q This will fit a 2006 5 lug Tacoma answer nowA 6 Lug Only
Are these comes with the diff drop?
Q Are these comes with the diff drop? answer nowA It does not come with diff drop kit
You may also like…
ICON 0-2.75″ Lift Kit Stage 2 for 2016-2021 Toyota Tacoma(0 reviews)$2,132.80 Add to cart