Old Man Emu Upper Control Arms For 2005-2021 Toyota Tacoma
Old Man Emu Upper Control Arms For 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Toyota Tacoma
Old Man Emu Front Upper Control Arms are now available for Toyota Tacoma and a perfect match for OME suspension options.
When installing a new coilovers or struts to an Independent Front Suspension (IFS) vehicle, the caster and camber can be pushed outside the factory specifications.
IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory.
ARB 4×4 Accessories is pleased to announce the addition of the Toyota Tacoma OME UCA’s that will help bring the alignment cams back into an acceptable range for both caster and camber.
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joint
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber/caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
Wheel Alignment is required when installing shocks and UCA’s.
If the vehicle is fitted with aftermarket tires/wheels, fender clearance should be checked. Additional caster may be required if the tires/wheels do not clear. Wheel alignment information is included in the fitting instructions.
OME Upper Control Arms will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).
2005-2020 Toyota Tacoma 4WD/2WD Prerunner (6 lug)
Will not fit a 5 lug Tacoma
Questions and answers of the customers
Is the ball joint replaceable when it fails?
Q Is the ball joint replaceable when it fails? answer nowA The UCA0005 is rebuildable. The ball joint (including boot and hardware) PN: UCASP013 can be purchased
I have a 21 Tacoma 4x4 , bilstien 5100 and one 888 . Will these work?
Q I have a 21 Tacoma 4x4 , bilstien 5100 and one 888 . Will these work? answer nowA Those UCAs 2ill work as for reinforced coils - officially OME shocks are recommended for them
Can the old man emu upper control arms handle a 3 inch lift on a 06 Tacoma?
Q Can the old man emu upper control arms handle a 3 inch lift on a 06 Tacoma? answer nowA It will fit on 2005-2020 TOYOTA TACOMA 3 inch lift UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
What brand / make / model of ball joints do these use? As in, if I walk into a parts store to get a replacement, what is the common part number to ask for?
- The description specifically mentions the caster/camber figures are based off a 2 inch lift. Does this mean that these UCAs are not appropriate for a 3 inch lift? Or would the figures just be diminished to some extent on a higher lift? Thanks!