Driveshaft Carrier Bearing Drop Kit for 2005-2021 Toyota Tacoma
Driveshaft Carrier Bearing Drop Kit for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Toyota Tacoma
Used to straighten drive line angles on 05-20 Toyota Tacoma trucks.
Lowers the carrier bearing to minimize the rear driveline angles.
Can be used in conjunction with shims (TT-RS).
Old Man Emu Fitment Kit FK29 (Driveshaft Spacer for Vibration Correction when lifting)
ships USPS priority if ordered separately
Questions and answers of the customers
I want to do a 2in spacer (front) and the 1.5in rear block for 2020 Tacoma TRD
offroad. Do you recommend I use carrier bearing drop kit?
- Is this necessary to buy with Dakar hd?
Q Is this necessary to buy with Dakar hd? answer nowA You can go without it but with rear lifts 2'' and more some trucks experience drive shaft vibrations
is there a drop kit for 2004 tacoma
Q is there a drop kit for 2004 tacoma answer nowA We actually don't offer a a driveshaft carrier bearing for 1st gen Tacomas
I have a 2019 Tacoma SR5 2WD with vibrations in steering wheel between 20-30 mph. Will this product correct this issue even on unlifted trucks?
- Recommended torque specs when tightening the bolt?
Q Recommended torque specs when tightening the bolt? answer nowA No special specs, just tighten the bolts properly
I installed a extra leaf spring that lifted the rear 1 1/2 inches now I have a shutter. Will this kit fix the issue
- how thick are the spacers?
Q how thick are the spacers? answer nowA 3/4 to 1/2 of an inch. I do not have the exact measurements
I lifted my 2012 Tacoma 4" in rear... one or two kits?
Q I lifted my 2012 Tacoma 4" in rear... one or two kits? answer nowA Haven't tested it by ourselves. I'd try one kit first, because two kits will ake transmission-to driveshaft angle bigger then one kit
Are these necessary when installing a 1.5 progressive AAL (no overload)?
Q Are these necessary when installing a 1.5 progressive AAL (no overload)? answer nowA Can't say that exactly necessary, but is recommended for many cases
If I install 3inch lift blocks to the back of my 2015 Toyota Tacoma Prerunner 2wd. How many kits will I need to install to make sure I have the right angle?
- I have a 2008 access cab with a bilstein lift. 2" lift kit do I need to install these? Thank you
Q I have a 2008 access cab with a bilstein lift. 2" lift kit do I need to install these? Thank you answer nowA It is not the bad idea to install it, but the truck can go without it. But the vibrations may be lower and the carrier bearing will live longer when this item is installed.
How thick are these spacers?
Q How thick are these spacers? answer nowA According to ARB, The FK29 is a 3/8" spacerA 8mm