Eibach Pro-Lift Front Coil Springs 2.5″ lift for 00-06 Toyota Tundra 2WD

SKU: E30-82-066-04-20
1 out of 5 based on 1 customer rating
(1 customer review)

Description

Eibach Pro-Lift Coil Springs for 2000, 2001, 2002, 2003, 2004, 2005, 2006 Toyota Tundra 2.5″ lift Front 2WD

Part: E30-82-066-04-20

Engineered with the same technology, craftsmanship and world-class materials that make Eibach springs and other suspension components the choice of champions in NASCAR, SCORE, CORR, the World Rally Championship, and even Formula 1.

Designed to increase ground clearance, for better off-road clearance and performance. The added suspension travel delivers a more responsive, more controlled ride over rough terrain, and gives you the additional wheel-well clearance to use bigger, higher-performance off-road wheels and tires.

  • For use with Eibach Pro-Sport Leveling Shocks  (Not for use with stock shocks)
  • Coils are powder coated Silver.
  • Provides approximately 2.5″ of average lift on the bottom clip setting and 3.2″ of average lift on the 2nd clip setting.
  • Designed for 00-06 Tundra’s
  • Sold as a pair, (2) front coils
*Note:  Average lift measurements shown are for Pro Truck Sport Dampers when used in conjunction with Eibach Pro Lift Springs.  The lift amounts are based on a stock vehicle with no added aftermarket accessories or additional weight.

Customer reviews

Rated 1 out of 5 stars
1 review
5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %

1 reviews with rating of 1 star (1 of 1)

(Show unfiltered results)

1 review for Eibach Pro-Lift Front Coil Springs 2.5″ lift for 00-06 Toyota Tundra 2WD

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      what is free length of this spring
    1. 0 votes
      Q what is free length of this spring answer now
      A It's the exact same as a stock coil. I just installed a set, and sized them up to the stock coils mid-install.
    2. Can I go higher than bottom clip on 5100s with these, if I have a 1" diff lowering kit?
    3. 0 votes
      Q Can I go higher than bottom clip on 5100s with these, if I have a 1" diff lowering kit? answer now
      A Higher clips can be used only with OEM coils
    4. Currently have these on my Bilstein 5100s on the bottom clip, but I am still not level. Can I go up one more to the second clip on the 5100s? 2006 4WD DoubleCab
    5. 0 votes
      Q Currently have these on my Bilstein 5100s on the bottom clip, but I am still not level. Can I go ...... Read more answer now
      A 5100s can be set higher only with OEM coils with lifted coils lowest notch is to be used
    6. Have a set of the 5100s coming and want a spring that levels my 02 tundra 4wd but dont want it being higher in the front the then back. Does bilstien make a coil to go with the 5100s that not rated at 2.5"?
    7. 0 votes
      Q Have a set of the 5100s coming and want a spring that levels my 02 tundra 4wd but dont want it be...... Read more answer now
      A There are no other coils unfortunately. Rear end is usaly higher then the front. in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://prntscr.com/gfgxwt
    8. Will these work with 5100's on my 2006 Tundra 2WD?
    9. 0 votes
      Q Will these work with 5100's on my 2006 Tundra 2WD? answer now
      A Yes, these coils will work Provides approximately 2.5″ of average lift on the bottom clip setting and 3.2″ of average lift on the 2nd clip setting. It is not recommended to go higher
    10. If I run these with 5100s what isolators do I use
    11. 0 votes
      Q If I run these with 5100s what isolators do I use answer now
      A You can use 5100 shocks with these coils without additional items
    12. what spring rate are these?
    13. 0 votes
      Q what spring rate are these? answer now
      A They're about 650 lbs sir
    14. Will these fit with Bilstein 5100's?
    15. 0 votes
      Q Will these fit with Bilstein 5100's? answer now
      A https://suspensionlifts.com/shop/nissan/nissan-frontier/lift-kits-nissan-frontier/nisstec-mk84-0-2-5-lift-front-coilovers-for-2005-nissan-xterra-frontier-and-pathfinder/

    Send me a notification for each new answer.

    -

    $225.00

    6 left in stock

    6 left in stock

    2-5 Day Transit Time