Bilstein 6112 Series 0.75-2.5″ Lift Kit for 2007-2021 Toyota Tundra
Bilstein 6112 Series 0.75-2.5″ Lift Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Toyota Tundra
Part Number: 46-206084
uses a 650 lbs/in. springs.
Designed for the serious off-road adventure seeker, the all new BILSTEIN 6112 Series Kit is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit features specially designed cold wound springs and an adjustable spring seat which allows for vehicle leveling, larger tires, and increased ground clearance. The kit comes with (2) 60mm shocks (2) springs and (2) billet spring seats. The 6112 is a direct bolt on application for late model half-ton trucks and SUVs which utilize a factory coilover suspension. The 6112 kit is for front applications and reuses the OEM top mount and spring isolators. To maximize performance, Bilstein recommends a 5160 Series remote reservoir shock for the rear
Questions and answers of the customers
Hi can Install this 6112 on my tundra 2008 TRD not a 4x4
Q Hi can Install this 6112 on my tundra 2008 TRD not a 4x4 answer nowA Yes
Can you assemble these before shipping?
Q Can you assemble these before shipping? answer nowA Unfortunately 6112s can't be preassembled
Says for 2007-2018 Tundra's. Assuming these will also work on a 2019?
Q Says for 2007-2018 Tundra's. Assuming these will also work on a 2019? answer nowA Right, sir
Do you have two units in stock?
Q Do you have two units in stock? answer nowA No
Will these also work on the 2008 to 2017 Sequoia?
Q Will these also work on the 2008 to 2017 Sequoia? answer nowA The mountings may fit but we haven't tested it by ourselves. The ,manufacturer specifoes it only for Tundra
Will these fit my 17 Crewmax????
Q Will these fit my 17 Crewmax????There are no answers for this question yet. Answer now
Do you recommend new UCA if I run these on the top setting?
Q Do you recommend new UCA if I run these on the top setting? answer nowA You can use them without new UCAs if not exceedint the 3'' of total front lift. But UCAS are always not the bad idea. Please keep in mind, that front diff drop kit is recommended if having more then 1.5 of front lift on 4WD trucks to increase the cv axles life.
Can these be set at zero lift since I already have a level kit and I just want a better than stock shock and spring?
- Can you run a leveling kit with these spring/strut combo on a 2012 toyota tundra?
Q Can you run a leveling kit with these spring/strut combo on a 2012 toyota tundra? answer nowA The leveling kit is not recommended because it can cause too high lift. These are ride height adjustable and you can set them to a desired height up to 2.5''
Can you put the 700# Eibach springs on the 6112 for my Tundra, Like your 5100 set-up, I want to get the new 6112's with the higher spring rate to support 180 lb aftermarket bumper. Thanks
- I have the 2014 toyoTa crewmax sr5. Do I have to put a lift if I want to change my shocks to the bilstein 6112 series? I just want to change the shocks no other mods.